cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
11206
Views
0
Helpful
3
Replies

6509 error "Module Failed SCP dnld"

shiran.wang
Level 1
Level 1

My 6509-E

IOS version:15.1(2)SY7

process card:VS-S720-10G

issue description:after reboot line card can't load.

have an error message

Last transition recorded: (insert)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (no_power)-> powered_off (operator_power_on)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)->

check_power_on (power_on_ok)-> wait_til_online
*Aug 16 06:18:56: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Module  Failed SCP dnld)

Router#sh module all
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  2   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1520DPBE
  5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1336Y4WV
  7   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL1519D64R

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  2  c89c.1de2.d064 to c89c.1de2.d093   4.1   Unknown      Unknown      Other
  5  0021.a094.8288 to 0021.a094.828f   3.4   8.5(4)       15.1(2)SY7   Ok
  7  6400.f1e3.ab90 to 6400.f1e3.aba7   5.0   Unknown      Unknown      Other

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  2  Centralized Forwarding Card WS-F6700-CFC       SAL1518CRN2  4.1    Other
  5  Policy Feature Card 3       VS-F6K-PFC3C       SAL1337YE4A  1.2    Ok
  5  MSFC3 Daughterboard         VS-F6K-MSFC3       SAL1337YHGY  5.2    Ok
  7  Centralized Forwarding Card WS-F6700-CFC       SAL1518D0P3  4.1    Other

how can i fix this problem?

thanks!

3 Replies 3

Mark Malone
VIP Alumni
VIP Alumni

Hi

here is the troubleshoot doc for that exact issue follow every step in it see if it comes backonline , if not may need rma

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/116115-trouble-linecard-00.html

I don't know the figure means,

Router#remote command switch  show scp counters

received packets            = 26289
transmitted packets         = 15686
retransmitted packets       = 11
fast retransmitted packets  = 0
loop back packets           = 10625

transmitted expedited pkts  = 0
Router#remote command switch  show scp counters

received packets            = 26673
transmitted packets         = 15710
retransmitted packets       = 11
fast retransmitted packets  = 0
loop back packets           = 10985

Router#remote command switch  show scp status  

Rx 27075,  Tx 15734,  scp_my_addr 0x4
Id Sap      Channel name    current/peak/retry/dropped/total  time(queue/process/ack)
-- ---- ------------------- --------------------------------  ----------------------
0  11   SCP Unsolicited:11      0/    0/    0/      0/    0      0/   0/   0
1  20   SCP Unsolicited:20      0/    0/    0/      0/    0      0/   0/   0
2  0    SCP Unsolicited:0       0/    2/    0/      0/ 6400      0/   0/7016
3  2    SCP Unsolicited:2       0/    3/    0/      0/ 6456      0/   0/   0
4  21   SCP Unsolicited:21      0/    0/    0/      0/    0      0/   0/   0
5  16   SCP Unsolicited:16      0/    0/    0/      0/    0      0/   0/   0
6  1    SCP Unsolicited:1       0/    3/    0/      0/   51      0/   0/ 324
7  18   SCP Unsolicited:18      0/    0/    0/      0/    0      0/   0/   0
8  17   SCP Unsolicited:17      0/    0/    0/      0/    0      0/   0/   0
9  33   SCP async: LCP#5        0/   32/    0/      0/ 2955    316/ 280/   4

00:24:35: SP:     scp_dnld_module 2 : 0 : 0: during state enabled, got event 3(dnld_failed)
00:24:35: SP: @@@ scp_dnld_module 2 : 0 : 0: enabled -> download_failed
00:24:35: SP: Stop timer
00:24:35: SP:  Slot 2 changed status to FAILED
Aug 16 16:30:12: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Module  Failed SCP dnld)
00:24:35: SP: scp_dnld_oir_status(2): status = 0
00:24:35: SP:     scp_dnld_module 2 : 0 : 0: during state download_failed, got event 2(disabled)
00:24:35: SP: @@@ scp_dnld_module 2 : 0 : 0: download_failed -> disabled
00:24:35: SP: disable_action(2/0):
00:24:35: SP: Stop timer
00:24:35: SP: stop_download_process() slot/proc 2/0, download_pid: -1 my_pid: 77 image_fd: -1
00:24:35: SP: is_module_under_rapid_boot: slot: 2, status: 0
00:24:46: SP: scp_dnld_oir_status(2): status = 0
00:24:46: SP:     scp_dnld_module 2 : 0 : 0: during state disabled, got event 2(disabled)
00:24:46: SP: @@@ scp_dnld_module 2 : 0 : 0: disabled -> wait_til_enabled
00:24:46: SP: scp_dnld_oir_status(2): status = 1
00:24:46: SP:     sm_debug_init : debug already initialized
00:24:46: SP:     scp_dnld_module 2 : 0 : 0: during state wait_til_enabled, got event 1(enabled)
00:24:46: SP: @@@ scp_dnld_module 2 : 0 : 0: wait_til_enabled -> enabled
00:24:46: SP: Start REGN timer for 2 with 240 sec

Cisco TAC engineer tell me the line card must to be RMA,

this is an hardware problem

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco