05-07-2009 09:19 AM - edited 03-06-2019 05:35 AM
Hello.
I have a WS-C6509 core switch running in hybrid mode (software revisions SP: BTSYNC_cat6000-sup2k8.8-3-6.bin, RP: c6msfc2-dsv-mz.121-27b.E1.bin) that I would like to upgrade to native mode IOS revision c6sup22-dsv-mz.121-27b.E4.bin. The core switch has the following modules installed:
WS-X6K-SUP2-2GE w/ WS-F6K-MSFC2 & WS-F6K-PFC2
WS-X6408A-GBIC
WS-X6148-45AF w/ WS-F6K-FE48-AF
WS-X6348-RJ-45
WS-X6348-RJ-45
WS-X6348-RJ-45
WS-X6348-RJ-45
WS-X6148-45AF w/ WS-F6K-FE48-AF
I would like to confirm that the WS-X6148-45AF modules will function in a 6509 running in native mode with the above mentioned IOS revision.
BTW, my SP has RAM/Flash of 128/32 and my RP has RAM/Flash of 128/16.
Solved! Go to Solution.
05-07-2009 09:45 AM
Based on the Release Notes, it seems the support began with 12.2(17d)SXB on Sup2
HTH,
__
Edison.
05-07-2009 09:45 AM
Based on the Release Notes, it seems the support began with 12.2(17d)SXB on Sup2
HTH,
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: