06-10-2008 02:22 PM - edited 03-05-2019 11:32 PM
after the boot up of the Switch SyStem
Led is Orange and not Green, any paticular reason Why.
Thanks for the help
06-10-2008 03:37 PM
Thanks I did check the power supply connection to the Ups and one Had come Loose
after reseting the connector Led turned to Green.
Thank you for the support
06-10-2008 03:19 PM
Yes everything looks OK thus far. Try the "show diagnostic content module 5" command. This will show the advanced diagnostics on the line card, and show any failed tests.
07-24-2011 08:16 AM
"show module" output shows that both the supervisors are up and have passed all the diagnostic tests - so both the supervisors are working fine and in good state. If there is any problem with the module then you would see it in the "show module", "show logging buffer 1023" & "show log".
We can also clearly see that the standby supervisor is in redundant hot state, and has synced up with the active. So i dont see any issues with any of the modules.
Regards,
Ranganath
(TAC)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: