cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
760
Views
0
Helpful
3
Replies

7912 to pc - no ip at pc

nikalleyne
Level 1
Level 1

Guys,

I have my 7912 phone connected to the CME and it gets IP I can make calls, etc. I now wish to connect the phone to the PC but I can't seem to get an IP. Can someone see what I'm doing wrong here.

----- show int f0/1/1 switchp
Name: Fa0/1/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 1 (default)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1,20-22,100
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: 22
Appliance trust: none

----- Show Run

!

interface FastEthernet0/1/1
switchport access vlan 21
switchport mode trunk
switchport voice vlan 22
spanning-tree portfast

!

interface Vlan21
ip address 192.168.21.253 255.255.255.0
ip helper-address 192.168.20.8
h323-gateway voip bind srcaddr 192.168.21.253
!
interface Vlan22
ip address 192.168.22.253 255.255.255.0
ip helper-address 192.168.20.8
!

---- Show IP Int brief
Vlan21                     192.168.21.253  YES NVRAM  up                    up
Vlan22                     192.168.22.253  YES NVRAM  up                    up

All help appreciated.

Thanks

1 Accepted Solution

Accepted Solutions

spremkumar
Level 9
Level 9

Hi

Can you configure the switch port mode as access instead of trunk?

regds

View solution in original post

3 Replies 3

spremkumar
Level 9
Level 9

Hi

Can you configure the switch port mode as access instead of trunk?

regds

!

interface FastEthernet0/1/1
  switchport access vlan 21
  switchport mode trunk
  switchport voice vlan 22

spanning-tree portfast

!

If I take out the trunk and have only

!

interface FastEthernet0/1/1
  switchport access vlan 21
  switchport voice vlan 22

spanning-tree portfast

!

The phone neither the computer gets an IP. The phone gets an IP if we have

!

interface FastEthernet0/1/1

switchport access vlan 22

spanning-tree portfast

!

This also allows the computer to get an IP but the computer IP is within the voice subnet IP and I don't want this. Do I have to do any configuration on the phone to ensure it allows the computer on its eithernet port as in assign the switch's PC port to the VLAN I wish the computer to be in?

Thanks for your assistance

OK. I moved the configuration to the actual switch which I will be connected to and it is working the way it should. You were correct, there was no need for the port to the phone to be a trunk.

Thanks for the assistance

!

interface FastEthernet0/21
switchport access vlan 21
switchport voice vlan 22
no logging event link-status
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape  10  0  0  0
mls qos trust cos
no snmp trap link-status
auto qos voip trust
spanning-tree portfast
!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: