cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1608
Views
0
Helpful
1
Replies
Highlighted
Beginner

871 Initial Configuration

Haven't used router commands in years, so I thought this would be a lot easier in SDM. Rustier than I thought!! Need to create an internal vlan (192.168.1.0) and NAT WAN fe04 with ip that corporate has given us to use (45.245.13.21) to connect to corporate router (45.245.13.20). Need to have internal users on 192.168.0.1 go through 192.168.1.0 vlan connect to corporate 45.245.13.20. Suggestions??  Thanks!!!

Everyone's tags (3)
1 REPLY 1
VIP Expert

Re: 871 Initial Configuration

Here is the config guide you can start with.  There are examples on how to configure the interfaces with IP, host name , username, password , etc...

http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/857sg_bk.pdf

HTH

Reza

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards