Good afternoon. I posted this regarding an 857W many month ago and was never able to get it to work; in fact, I was told it would not work due to the limitation on VLANs, so I stopped trying. I now own an 877W, and have been told this should work. I have ADSL with 8 static IP addresses (non-congtiguous - go figure), served via RFC-1483 bridging. That means no username or password or anything - just a negotiation process. I have been operating for a long time in pure bridge mode, and everything does work, however, it seems a waste for this unit to sit there and just bridge the connection. I would like to actually get it to do some routing! Nothing I have tried works, and none of the tutorials on integrated bridging and routing seem to work either. Here is the scenario:
Available WAN IP addresses: 11.22.33.99, 11.22.33.166 - 11.22.33.172
Gateway: 11.22.33.1
What I would like to do is hold the 11.22.33.99 address at the 877 and use it for DHCP, WLan, IPv6 tunnel endpoint, etc. I would then want the other addresses (166-172) bridged over the FastEthernet interface to do what I want with them. I'm not sure how to make this work. For starters, here is my working configuration for pure RFC-1483 bridging and DHCP handling of the LAN:
#show run
Building configuration...
Current configuration : 1640 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname whatever
!
boot-start-marker
boot-end-marker
!
enable secret 5 whatever
!
no aaa new-model
clock timezone PST -8
clock summer-time PDT recurring
!
!
dot11 syslog
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.200
ip dhcp excluded-address 192.168.1.250 192.168.1.255
!
ip dhcp pool dhcp1
network 192.168.1.0 255.255.255.0
dns-server 192.168.1.100
default-router 192.168.1.100
!
!
no ip domain lookup
!
multilink bundle-name authenticated
!
!
username whatever
!
!
archive
log config
hidekeys
!
!
!
bridge irb
!
!
interface ATM0
no ip address
no ip route-cache cef
no ip route-cache
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5snap
!
dsl operating-mode auto
bridge-group 1
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
shutdown
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Vlan1
no ip address
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.1.1 255.255.255.0
ip virtual-reassembly
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
no modem enable
line aux 0
line vty 0 4
login
!
scheduler max-task-time 5000
end
