cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4300
Views
0
Helpful
6
Replies

887V and BGP

PATRICK DUPONT
Level 1
Level 1

Hello All,

I need help i have a  887V and put this IOS:lash:c880data-universalk9-mz.150-1.M1.bin which in the Cisco Feature Navigator

which says it that my IOS should have Advanced IP and supports BGP, now the issue i am having is when i want to use the BGP is is not in the list, What am i missing here?

Example Below:

887V(config)#router ?

  odr  On Demand stub Routes

  rip  Routing Information Protocol (RIP)

887V uptime is 1 minute
System returned to ROM by reload at 13:46:51 UTC Thu Feb 10 2011
System image file is "flash:c880data-universalk9-mz.150-1.M1.bin"
Last reload reason: Reload Command

3 Accepted Solutions

Accepted Solutions

Hello,

It is perhaps necessary to purchase and activate a specific feature license on your router to unlock the BGP capability. Can you verify your current licenses using the show license feature and show license all commands?

Best regards,

Peter

View solution in original post

Feature name             Enforcement  Evaluation  Subscription   Enabled

advipservices               yes                  yes                no                     no

View solution in original post

Srry i have never seen this before?

It's OK.  That's what we are here for.

Ok so how do i enbale it???

The new ISR G2's have software license activation.  You'll need to contact the authorized Cisco reseller and purchase the license key to activate the feature set of your choice.

Cisco IOS Software Packaging and Licensing

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-579326_ps10745_Products_White_Paper.html

Thanks for the ratings.

View solution in original post

6 Replies 6

PATRICK DUPONT
Level 1
Level 1

Anybody have an answer for this issue i am having with my 887V?

Hello,

It is perhaps necessary to purchase and activate a specific feature license on your router to unlock the BGP capability. Can you verify your current licenses using the show license feature and show license all commands?

Best regards,

Peter

Thanxs alot for answering my post,

Here is an output of the commands u asked for:

887V#sh license fea

887V#sh license feature

Feature name             Enforcement  Evaluation  Subscription   Enabled

advipservices            yes          yes         no             no

advsecurity              no           no          no             yes

ios-ips-update           yes          no          yes            no

SSL_VPN                  yes          yes         no             no

887V#sh licen

887V#sh license all

License Store: Primary License Storage

StoreIndex: 0   Feature: advsecurity                       Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Evaluation License Storage

StoreIndex: 0   Feature: advipservices                     Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

        License Count: Non-Counted

        License Priority: None

StoreIndex: 1   Feature: SSL_VPN                           Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

        License Count: 10/0/0  (Active/In-use/Violation)

        License Priority: None

===================================================

sh Ver:

887V#sh ver

Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 02-Dec-09 18:48 by prod_rel_team

ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)

887V uptime is 8 minutes

System returned to ROM by power-on

System image file is "flash:c880data-universalk9-mz.150-1.M1.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 887VDSL2 (MPC8300) processor (revision 1.0) with 236544K/25600K bytes of memory.

Processor board ID FHK1415724T

1 DSL controller

1 Ethernet interface

4 FastEthernet interfaces

1 ISDN Basic Rate interface

1 Virtual Private Network (VPN) Module

256K bytes of non-volatile configuration memory.

126000K bytes of ATA CompactFlash (Read/Write)

License Info:

License UDI:

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*0        CISCO887V-K9          FHK1415724T

License Information for 'c880-data'

    License Level: advsecurity   Type: Permanent

    Next reboot license Level: advsecurity

Configuration register is 0x2102

Feature name             Enforcement  Evaluation  Subscription   Enabled

advipservices               yes                  yes                no                     no

Ok so how do i enbale it??? Srry i have never seen this before?

Srry i have never seen this before?

It's OK.  That's what we are here for.

Ok so how do i enbale it???

The new ISR G2's have software license activation.  You'll need to contact the authorized Cisco reseller and purchase the license key to activate the feature set of your choice.

Cisco IOS Software Packaging and Licensing

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-579326_ps10745_Products_White_Paper.html

Thanks for the ratings.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco