cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
313
Views
0
Helpful
3
Replies
Highlighted
Beginner

887W two ssid routing between VLAN

Hi, I created a second VLAN and a second SSID. My problem is that from a PC on the native VLAN 1 I can ping the IP of VLAN 2 192.168.2.254 but I cannot ping any other device that has connected to the second SSID.

How do I get routing to work between the two VLAN? I thought it would be automatically setup when I created the second VLAN using Cisco Configuration Professional?

regards, Mark

3 REPLIES 3
Highlighted
VIP Mentor

can you  just paste your topology(rough diagramm) to better understand the problem??

If you have switch between then , did you configure 2nd  vlan on switch ???

Regards

Highlighted

Hi, I'm not sure how to do that.

I have a LAN subnet 192.168.1.0 with gateway 192.168.1.254 and this is the native VLAN 1 SSID MyAP on my wireless.

I created a second VLAN 2 with IP 192.168.2.254 and a second SSID MyAP2.

I can connect to MyAP2 and to MyAP

I can ping devices on MyAP from the local LAN

I cannot ping devices on MyAP from the local LAN

I can ping 192.168.2.254

I have PCs on 192.168.1.xxx

regards,

Mark

Highlighted

do you have switch between your pc and wireless router ?????

if yes then

can you post the outpout of this command from switch :

sh vlan

Regards

Content for Community-Ad