Hello, all.
On a couple of stacks, when I run "install remove inactive" I get the following message:
install_remove: START Thu Sep 12 12:02:24 EST 2024
FAILED: install_remove : The input file INVALID is not a valid file
It is version 16.5.1a.
Here is the directory:
Directory of flash:/
155674 -rwx 2097152 Sep 6 2024 14:01:49 -05:00 nvram_config
155651 -rw- 2012104 Aug 13 2017 18:43:35 -05:00 cat9k-cc_srdriver.16.05.01a.SPA.pkg
155652 -rw- 70333380 Aug 13 2017 18:43:36 -05:00 cat9k-espbase.16.05.01a.SPA.pkg
155653 -rw- 13256 Aug 13 2017 18:43:36 -05:00 cat9k-guestshell.16.05.01a.SPA.pkg
155654 -rw- 349635524 Aug 13 2017 18:43:36 -05:00 cat9k-rpbase.16.05.01a.SPA.pkg
155655 -rw- 25285572 Aug 13 2017 18:43:36 -05:00 cat9k-sipbase.16.05.01a.SPA.pkg
155656 -rw- 20947908 Aug 13 2017 18:43:36 -05:00 cat9k-sipspa.16.05.01a.SPA.pkg
155657 -rw- 2962372 Aug 13 2017 18:43:36 -05:00 cat9k-srdriver.16.05.01a.SPA.pkg
155658 -rw- 13284288 Aug 13 2017 18:43:36 -05:00 cat9k-webui.16.05.01a.SPA.pkg
155659 -rw- 13248 Aug 13 2017 18:43:36 -05:00 cat9k-wlc.16.05.01a.SPA.pkg
155660 -rw- 6681 Aug 13 2017 18:43:36 -05:00 packages.conf
155661 -rw- 24248187 Aug 13 2017 18:43:36 -05:00 cat9k-rpboot.16.05.01a.SPA.pkg
155662 -rw- 407 May 19 2019 11:45:06 -05:00 bootloader_evt_handle.log
155663 drwx 4096 Aug 13 2017 18:49:41 -05:00 core
196609 drwx 4096 Aug 13 2017 18:45:21 -05:00 .prst_sync
212993 drwx 4096 Aug 13 2017 18:45:22 -05:00 .rollback_timer
221185 drwx 4096 May 19 2019 11:45:12 -05:00 dc_profile_dir
221187 drwx 4096 Aug 13 2017 18:45:24 -05:00 gs_script
155664 -rw- 0 May 19 2019 11:45:13 -05:00 dc_stats.txt
155665 -rw- 217 May 19 2019 11:45:16 -05:00 boothelper.log
155666 -rw- 62240 May 19 2019 11:45:36 -05:00 memleak.tcl
155667 drwx 4096 Aug 13 2017 18:45:40 -05:00 .installer
155670 -rw- 35 Aug 13 2017 18:50:08 -05:00 pnp-tech-time
155671 -rw- 40728 Aug 13 2017 18:50:10 -05:00 pnp-tech-discovery-summary
155672 drwx 4096 Nov 13 2017 12:21:57 -05:00 onep
155650 -rw- 10536 Mar 4 2023 14:45:56 -05:00 vlan.dat
11353194496 bytes total (10236383232 bytes free)
My guess is that there are no inactive files to remove. Am I right? Or am I using the wrong command?
Thanks a bunch!
