04-17-2019 08:50 AM
On a 4 stack 9300 the SW Version displays RELEASE SOFTWARE instead of the actual SW version of 16.6.4.a.
Show switch command output appears normal.
Show inventory the switch doesn't up.
Clients are on the switch and working fine. Any ideas?
XXXX-2-TR8-ASW-01#sh swi
Switch/Stack Mac Address : 00d6.fe7d.ad80 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active 00d6.fe7d.ad80 13 V01 Ready
2 Standby 04eb.40be.4780 12 V01 Ready
3 Member 00d6.fed6.6200 11 V01 Ready
4 Member 00d6.fe85.4500 10 V01 Ready
XXXX-2-TR8-ASW-01#sh ver
Cisco IOS XE Software, Version 16.06.04a
<TRUNCATED>
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.6.4a, RELEASE SOFTWARE (fc3)
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 62 C9300-48UXM 16.6.4a CAT9K_IOSXE INSTALL
2 62 C9300-48UXM 16.6.4a CAT9K_IOSXE INSTALL
3 62 C9300-48UXM 16.6.4a CAT9K_IOSXE INSTALL
4 62 C9300-48UXM RELEASE SOFTWARE CAT9K_IOSXE INSTALL
04-17-2019 10:22 AM
>.... Version 16.6.4a, RELEASE SOFTWARE
I can't see any conflict in this output.
M.
04-17-2019 11:15 AM
So switch 4 is not showing up in the show inventory command. It accurately shows switches 1-3.
In the output Switch 4 is showing Release Software instead of showing the code version (16.6.4a).
04-17-2019 11:28 PM
- Probably a bug ; you can issue the command session 4 in order to logon to that stack member and check the software version.
M.
04-18-2019 01:01 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide