cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Ask the Expert- SD-WAN

199
Views
0
Helpful
4
Replies
Beginner

9300 Stack on 16.6.4.a shows "RELEASE SOFTWARE"

On a 4 stack 9300 the SW Version displays RELEASE SOFTWARE instead of the actual SW version of 16.6.4.a.

 Show switch command output appears normal. 

 

Show inventory the switch doesn't up.  

 

Clients are on the switch and working fine.  Any ideas?

 

 

XXXX-2-TR8-ASW-01#sh swi
Switch/Stack Mac Address : 00d6.fe7d.ad80 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active 00d6.fe7d.ad80 13 V01 Ready
2 Standby 04eb.40be.4780 12 V01 Ready
3 Member 00d6.fed6.6200 11 V01 Ready
4 Member 00d6.fe85.4500 10 V01 Ready

 

 

 

XXXX-2-TR8-ASW-01#sh ver
Cisco IOS XE Software, Version 16.06.04a

 

<TRUNCATED>

 

 

Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.6.4a, RELEASE SOFTWARE (fc3)

Switch Ports Model                 SW Version                            SW Image                            Mode
------ ----- ----- ---------- ---------- ----
* 1          62 C9300-48UXM    16.6.4a                                  CAT9K_IOSXE                   INSTALL
2            62 C9300-48UXM    16.6.4a                                   CAT9K_IOSXE                  INSTALL
3            62 C9300-48UXM    16.6.4a                                   CAT9K_IOSXE                   INSTALL
4            62 C9300-48UXM    RELEASE SOFTWARE               CAT9K_IOSXE                  INSTALL

 

 

4 REPLIES 4
Rising star

Re: 9300 Stack on 16.6.4.a shows &quot;RELEASE SOFTWARE&quot;

 

>.... Version 16.6.4a, RELEASE SOFTWARE 

 I can't see any conflict in this output.

 M.

Beginner

Re: 9300 Stack on 16.6.4.a shows &quot;RELEASE SOFTWARE&quot;

So switch 4 is not showing up in the show inventory command.  It accurately shows switches 1-3.

 

In the output Switch 4 is showing Release Software instead of showing the code version (16.6.4a).

Rising star

Re: 9300 Stack on 16.6.4.a shows &quot;RELEASE SOFTWARE&quot;

 

 - Probably a bug ; you can issue the command session 4 in order to logon to that stack member and check the software version.

 M.

Highlighted
Hall of Fame Community Legend

Re: 9300 Stack on 16.6.4.a shows &quot;RELEASE SOFTWARE&quot;

Upgrade the IOS.
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards