cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

95
Views
0
Helpful
3
Replies
Highlighted
Beginner

about voice vlan

I configured switch1 and switch3. Between switch1 and switch3 (via fiber patch cable) both access and voice vlan are working. But when i put switch 2 between sw 1and sw 3 voice vlan not working. Is it possible?

Everyone's tags (1)
3 REPLIES 3
Enthusiast

Hi,How is the configuration

Hi,

How is the configuration on the switch connecting ports? Is it trunk port?

Also, have you created all the VLANs in the new switch.

CF

Beginner

switch2:!interface

switch2:
!
interface FastEthernet1/0/48
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan 1
 switchport mode dynamic desirable
end

!
interface GigabitEthernet1/0/4
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan 1
 switchport mode dynamic desirable
end

Enthusiast

Ali,You have allowed only one

Ali,

You have allowed only one VLAN in the trunk. Please permit the voice VLAN also in both the trunk. Edit this command to permit the voice VLAN:

 switchport trunk allowed vlan 1

 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards