Accessing multipe VLANs on SG500

[SRBerg6803]

I have done this a million times and something just isn't clicking today for some reason...

Switch: SG500

VLANS: 1 (default) xxx.xxx.0.0/24 network, 150 (device management vlan) xxx.xxx.150.0/24 network

I am plugged into port 1. This is a trunk port with VLANs assigned as follows:

1. VLAN 1 (Default) - Untagged
   
2. VLAN 150 (dev mgmt) - Tagged
   

Device is plugged into port 2. This is an access port with the following VLAN assigned:

1. VLAN 150 - Untagged
   

Why is it I cannot communicate with the device on port 2?

[SRBerg6803]

Nevermind. I had the gateway information all mucked up in the router. All is well.