cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1039
Views
0
Helpful
4
Replies
jabouaf
Beginner

ACL by name for SNMP community

Hello,

I look for some release information summary giving some information about the IOS starting offering availability for using named ACl with SNMP comminuty on catalyst (2950, 2940, 2960, 3750, 4500, 6500).

I used the command loopup tool, but this do not help me so much.

For IOS (all IOS command)  this option is available since 12.3(2)T.

But what about those switches ?

Regards,

Jean-David

4 REPLIES 4
jabouaf
Beginner

The link http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtsnmpal.html does not give the starting IOS for those switches.

Regards,

Jean-David

'ip access-list standard name' can be used as a Standard ACL

Hi Jean,

I would request you to create an access-list like below and use it for SNMP string.

ip access-list standard SNMP_ACCESS
permit 10.10.10.20
permit 10.10.10.30
permit 10.10.10.40
permit 10.10.10.43

snmp-server community XXXXXXX RO SNMP_ACCESS


Please rate the helpful posts.
Regards,
Naidu.

Hello Latchum,

Hello Latchum,

Thank you for your suggestion.

I know that is this work then I’ll do it like this, but a lot of models of switches are concerned for a customer.

I don’t have an access to them. Anyway because there a lot of switches concerned, I can’t try on each model/IOS release.

Regards,

Jean-David

De : naiduccnp

Envoyé : lundi 17 octobre 2011 09:41

À : Jean-David Abouaf

Objet : - Re: ACL by name for SNMP community

Cisco Support Community<>

Re: ACL by name for SNMP community

created by Latchum Naidu<> in LAN, Switching and Routing - View the full discussion<>