When I arrived onsite the power to the injector was unplugged and when I plugged it in there was still no connectivity. The ethernet port seem to be down and all LEDs are flashing.
I have power-cycled all networking equipment on both sides of the bridge, and reseated the coax, all to no effect.
I have tried looking through all the documentation Cisco has online regarding these systems but haven't found an answer regarding the error lights on the power injector. The power LED is flashing alternating red/green and the ethernet LEDs are blinking. If anyone wants to fill me in with what the injector is trying to tell me in I'd be very thankful.
Inviting all network professionals in operations! We'd like to understand what would be valuable for you in a mobile application. Your response will help Cisco improve a product feature that could benefit you. Thanks!
Click here to take the sur...
Cisco’s software-defined wide area network (SD-WAN) solution allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, as well as colocation facilities in order to imp...
1. Log into CLI of DNAC:
ssh maglev@< DNAC appliance IP> -p 2222
2. Run this curl command to get token to get member id:
curl -X POST -u admin:<admin user password> -H -V https://<CLUSTER-IP>/api/system/v1/identitymgmt/token
Enterprise Switching Business Unit is glad to announce Beta release 16.12.2 for all Catalyst 9200/9300/9400/9500/9600 and Catalyst 3650/3850 Platforms. This release is made available to allow users to test, evaluate and share fee...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...