10-04-2012 08:35 AM - edited 03-07-2019 09:16 AM
Dear All,
i need help in the following topic:
we converted from DSL to VDSL. First we used the telekom speedport w921 as model only connected to a
CISCO ASA 5505 router. Fine, but unstable (one time a week was a power reset nenessary).
Then we exchanged the speedport against an ALLNET ALL126AS2, because telekom told us to do so.
BUT: VLAN TAGGING (7) SEEMS NOT TO BE SUPPORTED BY CISCO WITH MY LICENCES ?
ANY IDEA ?
ralph kessler
PINGUIN Ing.Büro
06-06-2013 08:05 AM
Hi Ralph,
Did you solved that problem?
regards
11-04-2013 09:57 AM
Hi Ralph and atacan2006,
some update here?
Would be nice to get a working config for ASA5505 with ALLNET ALL126AS2.
Thanks
11-05-2013 12:54 PM
Hi,
I just want to let you know that it's running fine now.
Here is a short overview:
Hardware
Cisco ASA 5505 Security Plus
Allnet all126as2 VDSL Modem connected to asa port ethernet0/6
Config for the Interface and the VLAN:
interface Ethernet0/6
description --- WAN to VDSL Modem ---
switchport trunk allowed vlan 7
switchport mode trunk
interface Vlan7
nameif outside
security-level 0
pppoe client vpdn group dailin
ip address pppoe setroute
The rest was normal PPPoE setup and NAT.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: