I have a Catalyst 3560'm trying to use ASDM, i do not know how to set it
Go to Solution.
Good morning isaac mora
Thanks for using our forum
In order to enable ASDM, follow this steps in the router configuration.
Assign an IP address to the router: ip address x.x.x.x y.y.y.y
Create a username: ( username privilege 15 password 0 )
Enable Http server: ( Ip http server)
Enable Http secure-server : (Ip http secure-server )
Enable local authentication : ip http authentication local
Set a enable password : ( Enable secret cisco)
Enable local Authentication :
Line vty 0 15
privilege level 15
transport input telnet transport input telnet ssh
Then to access the SDM, you have to access from the bowser and enter the router's IP
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
Johnnatan Rodriguez Miranda.
View solution in original post
ASDM is the GUI for the ASA firewall. For switches you can use the embedded Device-Manager (if installed).
-- Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: