cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

3403
Views
5
Helpful
51
Replies
Cisco Employee

It can be any priority

It can be any priority between 1-15. That should not matter.

Regards,

Roopa

Beginner

Re: It can be any priority

How the WS-C2960XR-24PD-I can read the teng interfaces , it like 3850 Ten 1/1/1 & Ten 1/1/2 or how it can read it ?

Community Manager

Can we stack a 2960X LAN Base

Can we stack a 2960X LAN Base and a 2960XR IP Lite?­

If you found this post helpful, please let the community know by clicking the helpful button!
By doing so, and until end of January, you are helping Doctors Without Borders
Highlighted
Cisco Employee

2960x and 2960XR cannot be

2960x and 2960XR cannot be stacked, as they both have different license

View solution in original post

Community Manager

 ­I understand this switches

 ­I understand this switches can do L3 routing, does it support NAT/PAT?­

If you found this post helpful, please let the community know by clicking the helpful button!
By doing so, and until end of January, you are helping Doctors Without Borders
Cisco Employee

NAT/PAT is not supported on

NAT/PAT is not supported on the switch. The switch only supports basic L3 on 2960XR.

Thanks,

Roopa

Community Manager

Hi, is the netflow lite is

Hi, is the netflow lite is built in the switch­?

If you found this post helpful, please let the community know by clicking the helpful button!
By doing so, and until end of January, you are helping Doctors Without Borders
Cisco Employee

Yes Netflow lite is built in

Yes Netflow lite is built in the switch. The hardware is capable of net flow lite.

Thanks,

Roopa

Community Manager

Is there a SW recommendation

Is there a SW recommendation for 2960-S? If not, why not?­

If you found this post helpful, please let the community know by clicking the helpful button!
By doing so, and until end of January, you are helping Doctors Without Borders
Cisco Employee

15.2(2)E4 is the recommended

15.2(2)E4 is the recommended release for 2960S

Cisco Employee

15.0(2)SE9 is the recommended

15.0(2)SE9 is the recommended software for 2960S, and not 15.2(2)E4.

Thanks,

Roopa

Community Manager

Suppose if we change the mac

Suppose if we change the mac address of the device using the MAC spoofing changeR, how the switch will take once it learned the legitimate mac address?

If you found this post helpful, please let the community know by clicking the helpful button!
By doing so, and until end of January, you are helping Doctors Without Borders
Cisco Employee

To protect against MAC

To protect against MAC spoofing, there is the feature called IP Source Guard. Please  check the following link for details of the feature. Do get back to us in case of any queries.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_53_se/configuration/guide/3750xscg/swdhcp82.html

Thanks,

Roopa

Community Manager

Is there flexstack power

Is there flexstack power cable capabilty on 2960-XR (as ws-c3850 series)?­

If you found this post helpful, please let the community know by clicking the helpful button!
By doing so, and until end of January, you are helping Doctors Without Borders
Cisco Employee

2960Xr Flexstack cables are

2960Xr Flexstack cables are not power capable

CreatePlease to create content
Content for Community-Ad