Auto failover option

[vikas kumar]

Dear all

we have one HO and two branch office, our both branches on public IP and VPN as well.

we two links from HO to each branch, Fiber and radio link, radio link is direct from HO to branches, but One fiber link is going to ISP from there we have Both link to both Branches,

HO  - cisco3560

branch- Cisco2960

Isuue is, we want failover option between branch if any link goes down, it should switch over to another link autometicly. we need both branches on seperate VLAN.

please find enclosed setup.

help me.

thanks with regards

we have one issue to configure to network

[tarekaljallad]

Please provide current IP/vlan information. Are all the connections layer 2? You might just need to change port costs for spanning tree. If routing is involded then you'll need a routing protocol.

[vikas kumar]

dear friend,

thanks for reply

please find IP details and routing information,

see attachment

thanks with regards

vikas kumar