Switching

CISCO7609-S, WS-X6148A-GE-TX shape average command is not supported in output direction

Hi experts. i have problem that is WS-X6148A-GE-TX cannot config the shape, when i do the config as below: 7609(config)#int gi9/40.11007609(config-subif)#service-policy output MAPshape average command is not supported in output direction for this ...

Resolved! Need help with MTU issue (Ikev2 VPN tunnel)

Hi Im having issues with microsoft server replication across site to site vpn using a pair of cisco 2951 routers, I have one server either end of the tunnel and whilst they can ping each other just fine, when it come to RPC Replication i can see th...

Resolved! Forwarding Methods

Hi can anyone tell difference between Packet switching, Process switching and CEF. Thanks in advance.

Why is "ip dhcp excluded-address" Global

Hello, I'm learning Cisco at the moment and have looked at the DHCP configuration. Mostly is makes sense. However, I dont understand the motivation for: ip dhcp excluded-address x.x.x.x y.y.y.y being part of the global configuration and not part of a...

Resolved! etherchannel load balancing - questions

Hello Guys, @paul driver @Joseph W. Doherty @Reza Sharifi @Deepak Kumar @Georg Pauwen @Leo Laohoo I have some confusions about load-balancing with etherchannels, what are options to do load balancing ? how to decide the right method for best r...

Resolved! vrrrp skew time ?

Hello Guys, Can anybody explain vrrp skew time ? Thanks

Cisco ISR Route Leaking

Hello all, I have an ISR-4331 with 2 VRF's . One VRF Connected to an MPLS Circuit (BGP) and one VRF to the local LAN (OSPF). I'm trying to leak some routes from the MPLS into the OSPF VRF but I can't get this to work, not sure what I'm missing. ...

Resolved! Nexus 5020 No Switchport

Core10g_1(config)# int po1Core10g_1(config-if)# no switchportError: command not supported on this platform Am I missing something, because this command is supposed to be supported on the Nexus 5020. I have searched alot of documentation and noth...

Netflow Setup DMVPN GRE and Layer3

I wanted to get some real world experiences with Netflow setup on remote routers. We have netflow currently configured and working with our Netflow collector but I am reviewing the Netflow setup and thought this would be a good opprotunity to reach ...

Resolved! VLANs and Windows Network Menu

I have several devices located across multiple VLANs and I would like to be able to see said devices in the Windows Network tab. Currently all I am able to see is devices located on the same VLAN as the device I have the network tab open on. Is there...

VPN setup Question

Currently my ASA 5505 is setup using our WAN address from ISP for outside interface and vpn. Our ISP is changing the WAN block but not the what they call the Lan block.. It is outward facing not a private ip space. My question is how to I use the IP'...

core switch SW3850 clarification on some thing when show run

hi all can i know what is mean by the below bold lines when i show run on my core switch *************************************************************************** Unauthorized access is prohibited ***************************************...

SW3850 wsma meaning

Hey guys, I have a catalyst SW3850 and there are the following lines in the running config: wsma agent exec profile httplistener profile httpslistenerwsma agent config profile httplistener profile httpslistenerwsma agent filesys profile httplistener ...

Resolved! Multicast not working

Hello, This is my first post so I apologize If I make some mistakes. I would appreciate your help in this environment. I attach a physical/logical diagram to clarify. The "X" means 3, we have different systems which are the same but the second octect...