Hello Expert, I am trying to interconnect two CAT 4500 in VSS to cisco Firewall FTD. I have Configure Eterchannel on FTD Firewall. Below is the architecture that I am trying to do. My ip adresses are on the Etherchanel ports. I am thinking that p...
Forum Posts
I have a 2960X that i have a VTC client plugged into. I'm running a sniffer on the VTC client and I see DSCP markings leaving the device with markings on it. On the switch itself I have a monitor session configured to mirror the VTC port and I'm sn...
Hello, I'm testing dmvpn in order to use it to connect some locations and send all internet traffic over a central point. I configured one HUB and one SPOKE, clients connected behind SPOKE can reach the HUB network. Now I would like to send all traff...
Resolved! Host Can't Access Internet
All, I'm having some trouble getting hosts to connect to the Internet. Directly from the router (Cisco C1111-8P), I can ping 8.8.8.8 and google.com; however from a host machine, I can ping 8.8.8.8, but not google.com. Pinging google.com from the R...
Hi As of now UCS 6248 is connected with N9K switches (4 X 10 Gb on vPC). We need to connect atleast 2 UCS blades with DMZ zone, the DMZ switch has 1 Gb ports available. Do we get an advice on connection from UCS to DMZ switch? Thanks in advance
hi can any one help in this onei am trying to config a voice port over a router and when i push the cammand it gived me a statement as either isue shut or no shutdown to the voice port ..... if u do no shut it gives me a messg as the controller is d...
Resolved! AAA Tacacs configuration
Hi, I have configured AAA with Tacacs server but unable to authenticate any user from ACS4.2 Server. network connectivity is ok.Cisco Server ACS 4.2Cisco WS-C3850-Econfiguration uploaded for your reference please help on this to resolve the issue.###...
Resolved! Packet Tracer Question
I just found Packet Tracer today and it's a great tool to help me study. But one of the first things I noticed is I cannot do a show run int xxxxx command. I thought perhaps it was a IOS version issue so I did the upgrade to version 15 and still a no...
Resolved! Router config from ASA 5505
Hey everyone, I'm new to Cisco and trying to figure out how I can get my routers to give internet to my switches from my ASA 5505. My current topology looks like this: Modem - ASA 5505 - Cisco 1841 - Cisco 2950 - end device I can get internet acce...
Hi Guys, My 6509 has no TFTPdnld in rommon. Will I still be able to boot network tftp or boot system tftp? I have googled and tried a few examples but to no avail. Thank you in adv.
Hello, I have two NAS units connected to Nexus 7000 switch via two connections of 10G fiber, making the port channel. The throughput for file copy is extremely poor. I am getting less than 100 megabits/sec. The NAS units are on the same VLAN. QOS is ...
Hi Guys,Iam seeing above issue on two of my switches connected to core switch ....i know there are quite of few discussion open on same issue but mine is diff....i see same issue on two switches connected via core swicth on same vlan ( 112)....when i...
Below are my setting for the Vlan and ipVlan 1 :10.0.0.254/24Vlan 6: 10.0.6.254/24Vlan 10: 10.0.10.254/24 Management Vlan I would like to allow connection from Vlan 10 to Vlan 6 but blocking connection from vlan 6 to vlan 10. I heard that it can be ...
Good Day, I have migrated two of my core switches. new cores are 9407 whereas, the access switches are a mixture of 2960 and 3850. All trunks are up and working but VTP version number is not getting matched. Since cores are the servers and access swi...
Resolved! What Is The Purpose Of ISL?
Hi AllWhat Made Cisco Work On The ISL Encapsulation Protocol When The IEEE 802.1Q Protocol Was Efficient? What Advantage Does The ISL Has Over The IEEE 802.1Q?
