Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

Hello friends   pcs 172.16.20.0/24 connected to switch IP address 172.16.100.6------switch 172.16.100.1---switch 172.16.100.149----- dhcp server ip 172.16.0.12 connected   I would like to block client discover process of dhcp for computers connected ...

I may not be technically advanced enough to get this problem straightened out, but I'm hoping someone can help. I have a fairly new router with 4 directly wired inputs: 2 desktop computers, a DirecTV Broadband Adaptor and a 4-position switch that is ...

gateway router has a problem with IOS and needs to be upgraded in order to address two issues. First is Tacacs integration which will cause CPU to hug the box to 100% cycle. Second the process leaks memory and will stop the router from functioning.  ...

ngaitan by Level 1
  • 3515 Views
  • 13 replies
  • 0 Helpful votes

Hello,    How can I verify that QOS marking is working ?and packets are tagged ?    I want to be sure that voice traffic ( dscp value 46 ) is marked ......   // Switch2960X   Thank you for your Help 

Hello Guys, @Francesco Molino @Julio E. Moisa @Joseph W. Doherty    Is it possible on Cisco switches to watch the traffic for particular dest IP's from particular ports without using SPAN (Wireshark).   I just want to know the destination IP's from s...

ITexpert by Level 3
  • 1844 Views
  • 9 replies
  • 0 Helpful votes

Hi there,   is there any way, how to restrict traffic within VLAN? In my case I have vlan 40 (its range is from 10.1.40.0-10.1.43.255) I have created ACL like this and applied to vlan interface with inbound direction. Extended IP access list tlac    ...

vlad09 by Level 1
  • 2001 Views
  • 3 replies
  • 0 Helpful votes

IOS

can any one confirm that the below version will support AES-CTR algorithm.Possible share me the doc as well.   Device model:- CISCO1905/K9 version:- Release 15.7.3M3

Robo123 by Level 1
  • 518 Views
  • 1 replies
  • 0 Helpful votes

in our c3850 switch logs time is different from our local time. i have already set the timestamp service date time local but is not working. my current time is 11.22 and use timezon utc 5 30 example : Oct  3 05:52:35.163: [IDB Te1/0/7 UDRUnn] CSTATE_...