Hi Team, i have configure two core switches with HSRP for multiple Vlan but primary core switch is pinging from all vlan but unable to ping secondary core switch from Vlans Kindly suggest the configuration.
Forum Posts
Resolved! Multiple Core c4500 Deployment
I am having the following issue and hope an expert could help me. In our network for ca. 500 Users there are two Cores (active/backup) and one Server Switch with c4500 series Switch. Recently my boss was asking whether it is possible to convert & c...
Dear All, Do not worked (backup channel) a "ospf" for ipsec.No ping from the ip 192.168.10.2 at the ip 192.168.20.3 my file file_for_cisco_packet_tracer What is it problem?
Hi I have a question which I´m hoping to be a basic one and someone can give me a simple answer. On my Nexus 3064 I have a routed port with BFD setup (have BGP session with the remote neighbor). For some reason all outgoing packets on this port are t...
Hi, I have a problem with a cisco WS-C3850-48P, where I have had to move users to switchports in the second cluster of 24 ports to get them working. Although there are users quite happily working in the first 24 port cluster, there is a group of 4 po...
Problem: For a school project I have to configure a rather unconventional network. The original given topology was a bit simpler, but because we have to simulate the devices with EVE-NG we lost the ability to stack devices. So instead of stacking our...
Hi Guys, i am fighting with the PBR on L3 switch. i have few SVIs and two vendors (routers). Only one SVI should got thru vendor A, the rest thru Vendor B. In theory i have configured PBR and attached it on all SVIs i have matches but some strange ...
Hey everyone. CCNA R&S here. I have a potential client of mine that sometimes has issues with routing sound/video (for control systems) over ethernet. Some of the protocols include QLAN (proprietary by QSC) and Dante protocol (by Audinate). I was...
Hey guys,I just want to ask if you are experiencing the same thing on your WS-C2960G-24TC-L switch. According to show version, the DRAM of the switch is 64MB but when I do show memory free, the total is only 25MB. When I checked our monitoring server...
I do have an issue, my ISP don't see my EF markings coming in on their router from my Cisco 3850 switch. As per them they see my voice traffic in the BE queue. This is an all Cisco network from the phones to the switches to the routers My config fo...
Hi All,We have a business requirement to upgrade the supervisor engines from SUP engine 32 to Sup 2T on 6509-EI would like to know what IOS would be compatible with the new SUP 2T. Currently we are running the following IOSs3223-ipservicesk9_wan-mz.1...
Hi, I needed some help with the VPN ACLs I have setup in my Internet gateway router. I have provided access between the following networks on the IPSEC VPN, and it seems to be working fine. Source (Point A) 10.204.47.0/2610.204.47.64/2710.204.47....
Dear Gents, I have specific question relating default behavior as following. I create two distinct security zones with same level on Cisco ASA 5508. My question would be what will be default behavior in terms of inter zone communications, if is it ...
Hello Experts My deployment is as such that I need to connect upto 20 switches in a ring and I planning to run REP over them. I am not able to get any document for recommendation/consideration that has to be taken into account for having the quan...
Hi Team, As i am trying to configure LACP on below module . Mod Ports Card Type Model --- ----- -------------------------------------- ------------------ ----------- 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 2 48 CEF720 48 port 10/1...
