Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Hi,   I need to configure my router to access from External to Internal. Here is my configuration:   Using 2018 out of 262136 bytes!! Last configuration change at 09:13:00 UTC Mon Jan 1 2018!version 15.4service timestamps debug datetime msecservice t...

NeilTrend by Level 1
  • 435 Views
  • 4 replies
  • 0 Helpful votes

Hi,I configured an DHCP server with Static Mapping, but I don't get IPs on clients.I have:ip dhcp pool ITorigin file flash1:dhcp-it.txtdomain-name domain.comdns-server 172.16.5.2 172.16.5.26default-router 172.16.0.1...and the txt file:*time* Mar 14 2...

Hi community, i'm trying to configure PBR on a pair of 4500X in VSS software version is 3.6.0 E with ipbase license and the first thing i checked was if the feature was supported based for this platform/version/license. From release notes  https://ww...

Hi all,  I'm currently having issues with a project that involves 2 Cisco 2911 routers, 2 layer-3 3560 switches and a layer 2 2960 switch. The two layer 3 switches and the layer 2 switch are all channelled together.    The issue I'm having is that I ...

Ckey by Level 1
  • 4087 Views
  • 15 replies
  • 0 Helpful votes

Hi,Can I connect Nexus 5596 mgmt port to Nexus 2248TP-E swith for mamangement purpose.Management network details:I have seperate management network consisting of two Nexus 5k and 2248.Each server rack has one 2248 switch where server exclusive OOB po...

As the title says, I am connecting a stack of 3800 switches to a Nexus 5K pair using a virtual Port Channel. However, the second connection never comes up, and in the one case we've had where connection 1 goes down, the second connection didn't take ...

I understand some of This is not setup for redundancy I am just trying to connect so that EIGRP is working.    I have a setup with 2 N7K, distribution switch 3650 and 2 N9Ks.  I have a VLAN 5 10.5.5.0/28 7K 10.5.5.2 and .3. 9Ks 10.5.5.13 and .12.  Th...

Hi everyone,We have ip arp inspection and dhcp snooping enable in couple of 3750 and 3560 switches.  Everything works fine, excepted few case that DAI packet rate trigger and errdisable the port.  Later on we found out that most of computer that trig...

Hello Colleagues, i have running an cisco Nexus5596 Chassis at version 5.1(3)N2(1b) with N5K-C5596UP-SUP on customer side. now some Interface get status faulty: XXX# show interface status module 1 th1/33         --                 faulty    1        ...

mgrabs by Level 1
  • 3050 Views
  • 3 replies
  • 0 Helpful votes

Hi All,   I have a rather convoluted issue, which I think may have a very quick solution, but I do not have the expertise to figure this out.   We have our own local network (let's call it Network 1) connecting to two vendor networks.    One connects...

JamesS4 by Level 1
  • 436 Views
  • 2 replies
  • 0 Helpful votes

Please forgive me as I am learning ASA recently.   Let's say I have 3 configured interfaces on my ASA:   1. Internal 2. External 3. DMZ   Let's say I have a server called "web-server" @ 1.1.1.1.   Let's say I already have a rule on the firewall that ...

Amafsha1 by Level 2
  • 895 Views
  • 7 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card