Hi Team, I configured 2602I as a Standalone access point, but when create the SSID and trying to connect it, it shows as "Hidden Network". After that when I click the Hidden Network, it prompts the text box to type SSID. Why that happen ? Can someo...
Forum Posts
Resolved! ios upgrade in 3825
Hi we have a router containing ios c3825-advipservicesk9-mz.124-22.T5.bin. In addition to regular router function, we also need its vpn function. now we want to upgrade its ios. Which version is best? Thank you
Resolved! IGMP Snooping for same VLAN Traffic
Hi, If the source and the receiver of the multicast traffic is on the same VLAN, would IGMP snooping work? Lets say there is no active L3 SVI interface on the switch and the traffic is just flowing between 2 hosts on the same VLAN. Thanks!
Must be the IOS, thats the only thing I can think of. Switch 3-6 CPU is OK under 15%. It's just SW1 and SW2. Any ideas why that is? ROM: IOS-XE ROMMON BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 3.56, RELEASE SOFTWARE (P) 6 WS-C36...
Hi All I'm sure this has been discussed before, what tools are people using and find most useful for Network monitoring, so things like availability, capacity, usage etc etc. Things like Solarwinds / Whatsup Gold, SevOne etc Cheers
I am looking for a command that will indicate that there are ASIC level packet drops due to over subscription
Hi! I would like upgrade two nexus3271pq (vpc peer) , but i get message when I am trying to upgrade nxos from 7.0(3)I2(2b) to 7.0(3)l4(6). This message is normal? Could you help me, please ? I attached the pictures. Thank you very much. T...
Hi, I'm relatively new to networking, I'm having trouble with the server configuring DHCP ip addresses for computers in three VLANS:10,20 and 30. I've configured the VLANs on one switch and configured the router's ip address as well as the ip address...
Resolved! IPv6 Addressing Whitepapear
Hi Folks, I am trying to find the latest IPv6 WhitePaper Cisco have published. The one i can find as the latest is: https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Aug2013/CVD-IPv6AddressingWhitePaper-AUG13.pdf And one from 2008, but wh...
Hello, I have cisco router 2600 series and configured as DHCP server, so, i want it to stop obtaining IP Addresses in specific time and start obtaining IP Addresses again in specific time. Regrads, Hasan Nisar
how to vlan this scenario? School of Computing has six computer labs having 50 PCs and 2 computer labs having 20 PCs. It has 15 lecturer rooms and 5 head of department rooms. Also there is a program admin office which has 7 PCs and a networked printe...
Resolved! Ansible and OSPF
I'm trying to configure Ansible to configure OSPF on a lab router. So far I can get Ansible to create a Loopback0, but keeps failing on the ospf config. I'm new to this, so I'm not sure if I'm using the correct model for a cisco 3800 router.
When we generate LSA 8 and LSA9,10,11 in ospf and how they are generated.
Resolved! DHCP not obtained on Vlan
Hi, I'm trying to figure out why the DHCP is not being handed out on Vlan 1303. I have a DHCP server on Vlan 1300 that's working fine, but I have DCHP setup on an 800 series ISR and am not getting an IP address handed out. I have fastethernet2 se...
Hello, I have a pair of ports on opposing switches configured as port channels. One side has a different native VLAN to the other. From switch 1, I cannot ping devices on switch 2 in VLAN 46. What exactly is causing this to fail ? Thank you. Switch...
