Switching

Hi all , below is an excerpt from the link http://www.cisco.com/web/techdoc/dc/reference/cli/nxos/commands/l3/ip_directed-broadcast.htmlA device that is not directly connected to its destination subnet forwards an IP directed broadcast in the same wa...

Hi all, I have ip cef turn on vlan4 SVI - 192.168.0.24 Coreswitch#show ip cef 192.168.3.0192.168.3.0/24  nexthop 192.168.0.5 Vlan4Coreswitch# To reach the 192.168.3.0/24 network, vlan4 needs to go to 192.168.0.5  which is another router on the same...

There is no possibility to change queuing strategy on the Ethernet interface in the latest software. It is always fifo for all QoS configurations and QoS is not working properly. It was possible in the previous software. Example Cisco IOS Software, C...

I am looking for some clarification or explanation on how EIGRP load balancing works. I have a pair of 6500 VSS switches in data center 1 connected to a pair of Nexus 5672's in data center 2. The switches are connected via 4 1GB DWDM circuits. The i...

Hi Can someone please reply Does Cisco 3560 L3 Switch support VRRP with other vendor's switch?  What have been implemented here , Is there any misconfiguration in this running config?  --------------------------------------------------------------...

Hello every one , i have problem and can't solve it till now , it's look strange ,, first thing i have this network topology , my gatway is router cisco ASR 1002 ,, i have core switch and for each tower site i have cisco SG3000 small business ,,, a...

Hello, I would like to ask one question regarding performance issues of File server in a ring topology layout.File server is connected to the first switch in a line.Currently from the last two switches in a ring topology, when I download files from t...

Hello  How i  gives cisco 2960S ports timing schedule such as my particular port shut during my office time 08:00 AM to 05:00 PM? if any possibility ?

Hi, I have two site connected and I have this situation: Site A: Interface to site B with ip 10.41.105.62 vlan 100 with ip 45.100.0.1 Routes: ip route 45.100.0.0 255.255.255.0 Vlan100ip route 45.100.10.0 255.255.255.0 10.41.105.198 PC A in vlan 100 ...

Hello  How i  gives cisco 2960S ports timing schedule such as my particular port shut during my office time 08:00 AM to 05:00 PM? if any possibility ?

Hello  How i  gives cisco 2960S ports timing schedule such as my particular port shut during my office time 08:00 AM to 05:00 PM? if any possibility ?

Hi.. I have been running nexus 9396(n9000-dk9.6.1.2.I3.4a.bin) and so far I have been running static routing b/w nexus and router to connect other remote sites. But now I have a new site with L3 3850 stack switches which have two P2P circuit directly...

Hi, I have one VLAN interface on 6500 and I am unable to got it up. Vlan700 is administratively down, line protocol is down I add IP address and enter no shutdown but under sh ru interface vlan 200 is shutdown. maybe it won't go up because this VLAN...