I have a WS-C3560-48PS-S V07 The firmware on it now is c3506-ipbask9-mz.122-55.SE8.bin The latest is c3506-ipbask9-mz.122-55.SE10.bin What (if any) is the difference between SE8 and SE10?
I have a WS-C3560-48PS-S V07 The firmware on it now is c3506-ipbask9-mz.122-55.SE8.bin The latest is c3506-ipbask9-mz.122-55.SE10.bin What (if any) is the difference between SE8 and SE10?
Hello everyone, Why we configure bandwidth value to a interface ? Is it possible to utilize this value to rate limit ? If I adjust the bandwidth for a one gig ethernet interface from 1000 to 10, what is the real transit capacity for this interface no...
In a L2 switch sending traps to a syslog server, the source IP traps, is the IP of the active vlan. ("Management vlan"). But in a L3 switch with many IP and vlans. What is the source IP of traps? Can I choose it? In a real case, Using many vlans 1-55...
Hi all; Using EIGRP on a Cisco switch 3560-X with IPbase license. Is it supported? Please note that the actual model number of the switch is WS-C3560X-24T-S and the IOS version is c3560e-universalk9-mz.150-2.SE9.bin. Thanks
where can we download cisco active advisor. I goto cisco website, only cisco active network extraction 3.6.6 can be download provided user got license.
Hi, I have a network topology with 2 PPPoE dialer interface from 2 different ISP's and both are pro actively monitored by IP SLA's. Implementing Policy Based routing, LAN 1 uplink use ISP1 gateway and the latter uses ISP 2 gateway. However, I ...
Hi There, Just joined the Cisco Support Community and wondered if anyone can help...? I'm currently learning to use Cisco switch and Routers and recently picked up a Cisco 1801 and a Cisco SG200-26P for home use which might seem a bit of an overkill...
Hello Everyone, Just wanna ask if, what will I do to configure the following: I HAVE 2 ISP's WHICH IS CONNECTED TO MY CISCO ROUTER ISP 1 (IP: 58.58.58.58/27)>>>>Cisco Router<<<<ISP 2 (IP: 59.59.59.59/30) ROUTER 2951 Gi0/0 ====>>>>> ISP Modem (IP ...
HI all, I need some help i have router 1900 with NAT but its getting restart when i sh logg i can see this error. %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory Full logg *Jul 4 20:03:38.599: %IFMGR-...
I configured NAT overload (PAT) on the outside interface(WAN ineterface) and static NAT on router 1921/K9, but i noticed that the PAT usually preferred. here is the config : interface GigabitEthernet0/0ip address X.X.X.66 255.255.255.240 ip nat outs...
I need to know WS-SVC-ASA-SM1-K9 is combatible with VS-S720-10G or not ?
Hi all, CORE-SW01#sh run | inc snmp snmp-server community Oxn RO snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart snmp-server enable traps transceiver all .. .. .. .. .. .. .. .. snmp-server host 50.50.50.2 version 2c ...
Hello ..... I have cisco WS-C2960S-24PS-L Automatic down. Performed unplugged plug . Work normally .This problem had to do this several times throughout . - IS UPS UP Normal.
Hello, I want to install IOS on a Cat6509 currently running CatOS. Following are the module and current image details on it. I do not want to retain the config so no need to convert that. I just need to install CatOS. Please advise on what is the pro...
Hello every one , I encountered a very odd syslog from 3750 switch as below.any idear for this ? *Mar 13 19:57:30 CST: %DHCP_SNOOPING-3-DHCP_SNOOPING_INTERNAL_ERROR: DHCP Snooping internal error, failed to lock semaphore to age out snooping binding e...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM | ||
04-12-2024 05:48 AM | ||
04-12-2024 01:38 AM | ||
04-06-2024 09:31 AM |
User | Count |
---|---|
11 | |
10 | |
8 | |
5 | |
5 |