Switching

Hi All, I need to limit the bandwidth on a switchport to 1 MB, ,for the same i have applied below commands speed 10 srr-queue bandwidth limit 90  Also, i created policy map and assigned it to switchport as below. policy map 1MB class link_1MB polic...

hello i have 2 asa , 5540 and use of anyconenct  buy when singin and singup in snapchat recived error "network error plcease chek you networ kand try agian" how can fix this problem ?  i want access to snapchat by anyconenct please help me for fix...

Hi every one, I have a big problem, when I configure the port 2960x-24TS-L switch on Speed 1000 I have this message: % LINEPROTO-5-UPDOWN: Line protocol on interface GigabitEthernet1 / 0/1, changed state to down. By cons, if I reconfigures on 100 Spe...

hi Team  Not able to configute netflow for cisco switch 3560 ver12.2(35)SE5, Please help us to installed the netflow for same switch.if possible share the process.

Hi! I've been reading the documents on OTV, and it seems that the usual configurations either involve a direct connection between the N7K core VDCs in the 2 Data Centers (where the SVIs of the VLANs to be extended are located), or at most a router i...

Hello, I have been installing some new 3850 switches and had some problems building a stack of 3 same model types, but different version levels. Stacking the same version level has no problems (all V06 or all V07), but mixing version levels doesn't s...

I have an RV320 that worked fine for the last 1 and a half year. Now I cannot connect to it anymore. I tried to factory reset it, but this does not seem to work. I get no DHCP when plugging in to LAN1 and after manually setting my computer's IP to 19...

Hi All, I am seeing 12 % CPU Utilization continuously on 887 Router. "COLLECT STAT COU" & "esw_mrvl atupoll" processes are utilizing  5 %. xxxxxxxxxxxxxxxxxxx#sh proc cpu sortCPU utilization for five seconds: 10%/0%; one minute: 10%; five minutes: ...

Unable to configure 6509 with CAT OS to run dhcp service for a windows server. I am unsuccessful with finding any documentation and related configuration guides regarding 6500 series CATOS based switches. Thanks, Kerm

With all of my IOS devices as long as I have 'ip scp enable' I can do a remote pull of the running-config from a UNIX scp client using the following syntax: scp adminid@iosdns:running-config /tftp/router_switch/. This will 'pull' the running config...

Hello everyone, I'm having some trouble wrapping my head around how to accomplish something in my lab.  Right now I have an ASA5510 configured with eth0/0 as my outside (dhcp), eth0/1 as my inside (10.10.10.0/24 with DHCP), and eth0/2 as my dmz (172....

Hi , Is there any other way to generate traffic in a Nk5? or I only have the ping option? I need to test hsrp but the issue is I don't have any server installed. Thanks 380