Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...
Forum Posts
This would be on a 9500-40X.I have a couple of groups of vmware hosts - call them "A01 through A09" hooked to eth 1-10 and "B01 through B09" hooked to eth 11-20. I'd like to be able to configure a set of ports such that the ESXi host sees a standard ...
Hi thereWithout APIC, without storm control configuration, without any network traffic analysis tool, without any physical interference, without any configuration to be made beforehand or afterwards, is it possible for me to troubleshoot the broadcas...
I am unable to find how to enable write permission. as when I tried command write erase. Thx
Cisco 3750-E stack running 15.0(2)SE8, attempting to bring up port channel to 2921 router. First link comes up and bundles, but I get this on the second one: Jan 5 13:04:34 PST: %EC-5-CANNOT_BUNDLE2: Gi2/0/51 is not compatible with Gi1/0/51 and wil...
Hello,I recently updated the IOS of my switch via the web interface.After flashing the switch, I find myself with a minimalist interface instead of the usual web interface.Do you know how to get back the previous interface? Which version should I dow...
Hi AllI have a few Cisco Nexus 7710's in my network and was wondering if anyone knew of a way to determine what the overall input/output switching/routing performance was at any given time? I know you can get this from interface counters and net flow...
Hi All, Got a new unit Ver 17.03.05. When I do "Show version" it doesn't show the Config-Reg output. There is no option available to set it to "0x102" or any other values. Any ideas? Thanks Azad
Please suggest iOS version for mentioned Switch model, along with the upgrade procedure?Model Number : 4510R+E Serial Number : JAD203401EA
Hey everyone,I am having issues with my Netflow creating records and exporting it to our Analyzer. Connections have been verified and i did a PCAP on the server itself and it is receiving cflow protocol packets. I am running a C9200-48p on IOS 17.03....
I have followed the article below and it did remove some radius/user type 7 passwords from my running config, which is great. However, it didn't remove all type 7 passwords. I am wondering if there are any work arounds to update ip ftp password 7 xxx...
After over a month of my learning Networking basics and doing practicals, I dedicate at least 5hours everyday for this training.I was happy rounding up the final general test and I passed, but I wasn't given my badge. I was told I would be given a ba...
Resolved! Syslog has 2 different timestamps
Hi all!We have configured an applet to send a heartbeat message to out syslog server, but we have a problem with the timestamp.Even though we have configuredservice timestamps log datetime localtime msec show-timezone yearAnd we do have a correct out...
What is the difference between Interior and exterior gateway protocol?
Hi All,I am configuring tacacs configuration on cisco nexus 9200 and i am getting below error when i run the command aaa authorization commands default group PCCU-ISEError: AAA authorization failed AAA_AUTHOR_STATUS_METHOD=17(0x11)But same configur...
Do the timers (hello and hold) have to match between HSRP routers? I thought they had to, but when I tried it in lab, it didn't make any changes to the existing active and standby roles.What's the best practice of numbering "standby group number"? If...
