Hi all,We are facing some issues in Nexus 7K.when we excute the clear mac address command,it is going to be restarted.Could you please suggest me what might be the reason ?Thanks & Best regards,Krishna Chintada
ssue:======Replaced the faulty switch with the new one after which I see the port was shown down.europe3750#sh switch detailSwitch/Stack Mac Address : bbde.4B9H.5690 H/W CurrentSwitch# Role Mac Address ...
Helloo Guys, I want to configure cisco router 3645 for dual provider,1> Router is configured on Lease Line for Intranet ( Internal application access ) and internet both from HQ.Now we are going to hire ISP line locally from local ISP for internet us...
I have a few questions that I need help with. 1) If using a 7940 phone, it sets the CoS bit only (?) to 5, correct? It doesn't actually set a dscp value too, correct? 2) The switch maps the cos to dscp values internally using the map table, correct...
I have one server connected to distrubted switch or acces switch in network .They were 45 switches in netwrok and need help how to find that server connected switch from Core switch ?How many mehtodes and process we can use to find that connecte...
hi allour topology is that, core is 6500 which one port set vlan and directly use one 1G utp cable (only one cable)connect to 2960s-48T on each floor.there are one 2960S-48T and four 2960-24T on each floor.how to connect the switches ?a. one to onen...
I have a 5010 that simply won't load any system image. Loads the kickstart image just fine, but once at the Switch(boot)# prompt just give me garbage when I enter "load bootflash:n5000-uk9.5.1.3.N2.1b.binRestarting system.Loader Version pr-1.3loader...
I've been having issues with new 2960x's on the latest code. The output of show switch will show the switch I'm consoled into with the asterisk is the master but the front panel lights show a different switch is master. Is this a bug?
Hi,I need to upgrade a new 4507 and was looking for more information. Does this unit run CatOS or just IOS? Are all of the line cards needing upgrades as well as the OS? Any other info helpful.Thanks.
hi allour topology is that, core is 6500 which's one module is 1g and it's port is set vlan directly use one 1G utp cable (only one cable)connect to 2960s-48T on each floor.ex.interface gigabitethernet 5/9switch mode accessswitch vlan 9interface gi...
Hello,I'm setting up Netflow and wanted to make sure I wasn't missing anything or If it could be setup in a better manner?Router is 2801 Switch is C3560IP flow export is version 9. On the router I have one fastethernet port going to the high speed WA...
I'm experiencing issue with DHCP on Nexus 5K. I have ip dhcp relay address defined on the SVI (Vlan 10). In addition to that I have few another DHCP servers on the same broadcast domain. interface Vlan 10 no shutdown vrf member CUSTA ip address 17...
All, It was not clear to me what is the backplane of the switch WS-C3850-24S-E (24 ports). I need to know what is the backplane for layer 2 and layer 3.Does anyone have this information?Thank you!Luciane de Medeiros
