Switching

HelloI need help please  , i get some files (GUI files)  .rar downloaded from cisco site and i need to upload it to my flash. Is it necessary to convert it to  .tar using 7 zip program or i can upload it to my flash using .rar extension?. Thanks

Hi,I have several switches, three of them are managed from Cisco.All switches are connected to the Backbone ( 3560-X )the 3560-X is our backbone and it is connected to the GW/FW and to the 2950 and other 3560 with trunks.If for some reason i disconne...

Dear support,when will 2960-X be orderable to EMEA region?Best Regards

Hi, What are the main differents between Cisco Industrial Switches: 2000, 3000 y 2955?Best regards,

I have a server on the DMZ network and another on the internal network, both connect to the 4506.The server in the DMZ has had its gateway set to the firewall and I recently changed that to VLAN 14. But when doing a trace route from the server in the...

Hi.I have Cisco ME 4924 with 24SFPdownlink+4SFPuplink+2Xen10Guplink.What is the difference between uplink and downlink ports?What is the default configuration is set up at these ports? For example, for ME3400http://www.cisco.com/en/US/docs/switches/m...

Hi all,Just in case there is a way I am not aware of. Let's say I have a range for a VLAN: 192.168.1.0 /24, and I need to deny www traffic to ten(10) contiguous hosts from 192.168.1.10 thru 192.168.1.20. This statement:deny tcp 192.168.1.10  - 192.16...

We have a pair of 6509's setup in VSS. Our distribution layer is port channeled to the 6509VSS, one connection going to 6509A and the other going to 6509B. Our vlans live in the 6509's.We are setting up a trustwave NAC appliance and have a spanned po...

Dear All,I have cisco 4510R with sup6 and iam trying to inistall 1G SFP module on sup 6 and i given the fallowing cmd to change 10g to 1gcat4500(config)#hw-module module 6 port-group 1 select gigabitethernet.Core4500#sh hw-module module 6 port-groupM...

Hi,I have a WS-C6509-E switch with the Supervisor Engine VS-S2T-10G-XL: Cat 6500 Sup 2T with 2x10GbE and 3 x 1GbE with MSFC5 PFC4XL.Are the following modules supported with this SUP 2T in VSS setup:WS-X6704-10GE: Cat6500 4-port 10 Gigabit Ethernet Mo...