Switching

All,I'm pretty sure I already know the answer to this, but I wanted to ask some of you. Suppose you have a router die in the field in another state, country, etc. Cisco replaces that router, but it's going to have a blank config when your site receiv...

Hey ,Can any one suggest me the best IOS image for router 3925E . Currentry we are running c3900e-universalk9-mz.SPA.153-1.T.bin & I want to upgrade the Image. Traffis running through router is Voice and Data.Thanks in advance.

Have a network that has been experiencing a L2 issues and got an example of a mis-configuration below that I'm not sure how the network would react. There are a lot of other design issues around this scenario that’s not correct, but just want to unde...

Hello,Can anyone tell me the advantages or disadvantages why you would use bgp on mpls cloud over ospf on mpls cloud or vice versa?

Hello,I have two C2960S stacked switches. Does anybody know if there's a way to increase the maximum number of Etherchannels? The max number is 6 but i need around 9-10. Is there any way? (Some licence or something?)Thank you!

                   Hi Everyone,On 2620 Router is there any ios version that supports IPV6 ospf under interface config as shown below(config)#int fastEthernet 1(config-if)#ipv?ipv61(config-if)#ipv6 ?IPv6 interface subcommands:    ospf                O...

Hello,Can someone explain to me why we use access lists in a mpls cloud that uses IBGP. I thought for the most part  access lists were used on firewalls not routers running BGP. Do we even need access lists with bgp can't bgp work without access list...

i cann't understand the meaning of small businees switches for example , there is a Tender requiring Switch 24 port & 56 Gbps Throughput i found that comapnies offered Cisco 2960X  ,    not sure what not to use   " SG300-28 "  , This will give  there...

Hi,I have a device which work on PoE (IEEE802.3af). Is it possible to sent the data + power to the PoE device by use of Cisco PoE+ (IEEE802.3at) i.e Could PoE+ Switches (IEEE802.3at) support the PoE Devices (IEEE802.3af).Please help.ThanksAmey

Hi,I have a device which is a PoE device (IEEE802.3af). Can Cisco 3850 PoE+ (IEEE802.3at) support both data and power to Normal PoE (IEEE802.3af) devices.Please confirm.ThanksAmey

                   We have several switches that are connected to our Nexus 7k.  Most switches that are trunked and are getting CRC errors on the access switch uplink ports.  All switches that are connected via an access ports, have no crc errors.  A...