Hi,What is the priority order?I have enabled priority-queue out on int f0/1 so now Q4 should has the no1 priority. Wich is the second and the third?My goal is to assign priority(queue) to DSCP values. For example: DSCP 34,36,38,48 values should have ...
Hello Experts,. I was able to Ping the servers 10.14.32.246 and 10.14.32.26 successfully from couple of different Vlans like 10.14.x.x in the network but NOT from 10.14.14.x. However other servers in 10.14.32.x like 10.14.32.172 a...
Hi,I have a funny scenario that I can't get my head around on a customer network. I ping from LAN [10.10.10.0/23] to LAN [192.168.1.0/24] whom both run off the same switch. But I get one echo reply and then TTL expired. I clear the ARP and same resul...
Hi Friends,We have been reported, in our network, our teleprescence device is rebooting very often. After the intial troubleshooting, it has been decided as Issue is occuring due to the lan Networki am doing an Lan Audit to find Any issue with La...
Hi Community,I am trying real hard to obtain detailed QoS queues on the new c2960-X model. The documentation I got from the cisco site is does says about it but did NOT help. I need to know which queue is the priority queue, ef (CoS) among eight ot...
hello , We have a WS-C3750-24TS switch with existing image c3750-ipservices-mz.122-25.SEB1.bin , we were trying to make switch SSH compatable.Planning to put new image as c3750-ipservicesk9-mz.122-55.SE6.bin , please advise if I am using correct im...
i need a switch with following spec. but not able to get the proper model, can any one suggest me with the proper modelCompatibility IEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TXIEEE 802.3ab 1000BASE-TIEEE 802.3z 1000BASE-XIEEE 802.3x full-duplex flow co...
hi guys, i have 3550 switch when i boot up my switch i notice this !!! WARNING: The switch is not usable !!!... i need your advice guys and your expertise... thanks ---Posted by WebUser Jessie Catalino from Cisco Support Community App
Running Cisco VCS with mulitple Video End Points with multiple remote locations. I'm setting up the QOS for Video on the Routers and wanted to confirm a couple things. I've seen many posts regarding Video QOS but it seems each answer varies. Below...
Hello all,I would like to upgrade IOS version with the same feature set, but switch is out of support, so SMARTNET can not be bought. Is there any way how to upgraded? Is not it possile for free because product is discontinued so SMARTNET can not be...
I was trying to configure my Catalyst Express 500 switch (PID VID: WS-CE500-24LC V01) and i followed the step i found in a document on Cisco website but still it showed an error "Page not found" and address displayed on bar was"169.254.0.1/catalyst-...
We have maintained a data network for a company that cosists of 8 WS-C2960-24TC-S and WS-C2960-48TC-S switches, and a CISCO1921/K9router. Our client's phone vendor has chosen to implement Allworx IP phones. They are requring the following topology:...
Hello,I use access list to close port on entry from internet but when I scan the port from internet, the port is still open (for instance 53 or domain). Does someone have any idea?I have a Cisco 1921 router on iOS 15.3Here is a part of my configurati...
