Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Resolved! Subnets per SSID

Hi all, I know this is a silly question but kinldy guide me as i dont have access to a proper wireless router/AP right nowI have understand that SSID essentially defines the WLAN client is connecting to. 2 SSID means essentially 2 different WLANs. Do...

Jonn cos by Level 4
  • 5530 Views
  • 9 replies
  • 0 Helpful votes

According to wikipedia, provisioning is prepraring or altering the state of an existing port. Could someone explain the real time needs or scenarios to provision a switch port. Thanks,Mugilan

mugil0901 by Level 1
  • 5326 Views
  • 3 replies
  • 0 Helpful votes

From Cisco.comActive Timer: This timer is used to monitor the active router. This timer                     starts any time an active router receives a hello packet. This timer expires in                     accordance with the hold time value that i...

lquin1978 by Level 1
  • 832 Views
  • 1 replies
  • 0 Helpful votes

Hello!I have a 2811 doing dNAT and not much else. I was playing around with NetFlow data exporting, when a very confusing issue arose.Initially, both interfaces had ip route-cache flow  configured, and everything worked fine. Then I switched to ip fl...

rrriip001 by Level 1
  • 1176 Views
  • 4 replies
  • 0 Helpful votes

Hello all,Does Cisco 2960X catalyst switches support Layer 3 Etherchannel ?I went throught the datasheet, where it mention of supporting Etherchannel technology only.Can any body confirm it to me please that does it support layer 3 etherchannel or no...

Anyone  have any idea what this message means or relates to?000017: *Nov  8 01:23:23.467: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "Init", ipl= 3, pid= 3,  -Traceback= 0x606A0ED4z 0x62DBF238z 0x622C3AACz 0x62770D64z 0x62786AC8z000018: *Nov  8 ...

jacob6000 by Level 1
  • 655 Views
  • 3 replies
  • 0 Helpful votes

HiI am trying to findout what the routing performance of a 3750-x isThe documents clearly states High-Performance IP Routing Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 3...

hobbe by Level 7
  • 18566 Views
  • 6 replies
  • 0 Helpful votes

We have a relatively small simple LAN behind a Cisco ASA 5510 firewall. Macs & PCs. On the same LAN are a couple of wifi routers which allow the option of using the internet & file servers via ethernet or wifi. I would like to change this so that peo...

rebelscum by Level 1
  • 954 Views
  • 1 replies
  • 0 Helpful votes

                   Hi                     We are unable to configure snmp v3 on the above.                    Does anyone have a proper idiots guide for this ?                    When adding a user there is no otion to add a "priv" level and I think ...

sdawson35 by Level 1
  • 735 Views
  • 3 replies
  • 0 Helpful votes

I had to connect a new Catalyst 2960 48TT switch to my Network. Which is connected straight to port two in Catalyst 3750G 48+4. I have three other already connected: 2 x Catalyst 2960 48TT and 1 Catalyst 2960 48TC.The problem is I can not see the new...