Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

My Cat65 can not auto-reboot now. Someone can help me?rommon 8 > dir bootdisk:Initializing ATA monitor library...Directory of bootdisk:8602    76314468  -rw-     s72033-adventerprisek9-mz.122-33.SXI5.bin2      33554432  -rw-     sea_console.dat2050  ...

pt_wang by Level 1
  • 1258 Views
  • 3 replies
  • 0 Helpful votes

Dear allwe have three Offices Site A, Site B and HQtwo offices are conncted via MPLS data link to HQ.we have connecte other SP to get internet access.HQ can access site A and B and Internet but sites cant reach HQ network. only sites cant  reach HQ a...

Hi All,Someone knows if the Supervisor 7 L-E included the Application Visibillity (Flexible Netflow FNF) or i must to purchase some license?Thanks!!Rolando

I have users with PCs connected to cisco phones and 'auto qos voip cisco-phone' configured on the access ports. In this case the DSCP values will only be trusted once the phone is detected via CDP. Is there anyway to extend the trust to the PC as it ...

Hello,  I have the following network :  Port 20 is configured as L3 port with IP = 192.168.10.5Port 22 is part of vlan 4Port 10 is part of vlan 5For node2 default gateway is set to 192.168.1.230I can ping from node2 to 192.168.1.230I can ping from no...

TonnyRomm by Level 1
  • 1376 Views
  • 5 replies
  • 0 Helpful votes

I have secondary Internet service dedicated for the most part to some wireless VLANs for guest and developer use. Right now a PIX is serving as the gateway and this works nice as I can DMZ the vlans and supply one-way inside access from our core to d...

Hi experts,We have pair of 6506-E series switches and we would like to upgrade IOS to ver s72033-adventerprisek9_wan-mz.12.2(33)SXJ4 from 122-33.SXJ2 because it best meets our long term requirements. These switches configure as virtual switching syst...

Hi All, I was going through CAT 6500 switch documents...I have little doubt on Bridge Domain in SUP2T.How is it possible to reuse VLAN on a per port basis.Can any one expain on this.ThnxBRegardsMJ

Hello,I have no problem copying files from my ASA to and from the flash, but how do you copy a folder?I have tired to tftp this sdesktop folder so I can copy it to another ASS, but I gert an access denied error:  187  8192        Jul 15 2013 15:01:21...

Hello All , I am replacing old 2960 with new 2960-S series swicthes .In old enviorment we only had 10/100 ports but on new switch we only have Gig ports .I was wondering if there is any option to limit the traffic to 100Mb on switch port without char...

Dears I have Cisco Switch Multilayer with the following specification :  "Cisco WS-C3560G-24TS ) "(Version : 12.2(44r)SE8Serial Num : FOC1621V057 please that ports are 1Gig , Can I change some ports of this Switch to 10Gig ? and how ? please guide me...

3750G-Core uptime is 6 hours, 35 minutesSystem returned to ROM by address error at PC 0x133561C, address 0x0System image file is "flash:/c3750-ipservicesk9-mz.122-35.SE2/c3750-ipservicesk9-mz.122-35.SE2.bin"WHY?

Is this topology posible?I would like to connect a stack of Cisco 2960S switches to two 4500X switches using etherchannel for redundancy. I have tried different methods but none of them work. The 4500X switches are not stacked (I don't think it is po...

Kryztian7 by Level 1
  • 638 Views
  • 3 replies
  • 0 Helpful votes

Hallo,Ich habe mich hier bei dem Forum registriert, da ich ein Problem mit der Priorisierung habe.Ich möchte erreichen, dass ich, bei einer komplett ausgelasteten Leitung durch einen Teilnehmer aus dem 192er Netz, immer aus dem 172er Netz priorisiert...