Hi,I'm looking to configure un bridge between : interface GigabitEthernet0/1.900 encapsulation dot1Q 1221 second-dot1q 900and interface GigabitEthernet0/0.900 encapsulation dot1Q 900-I can't use a "ip unnumbered GigabitEthernet0/0.900" because th...
Hi,I'm looking to configure un bridge between : interface GigabitEthernet0/1.900 encapsulation dot1Q 1221 second-dot1q 900and interface GigabitEthernet0/0.900 encapsulation dot1Q 900-I can't use a "ip unnumbered GigabitEthernet0/0.900" because th...
Despite the fact that this might be more a sales question than a technical support question i would like to ask you for help.(i didn't find any useful way to get in touch - by email - with any sales departement of cisco yet)We have two identically (s...
Hi, I configured a Switch Cisco 3560X with a basic configuraction, My problem is that when I access Web interface by http://X.X.X.X an login after the image that I attached.I tried restore the default configuration, also tried with...
Aug 24 11:32:16.275 AEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan21, changed state to downAug 24 11:32:36.827 AEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan21, changed state to upAug 24 11:35:23.854 AEST: %LINEPROTO-5-UPDOWN:...
hellohow to copy current switch's running config and paste to other one... please write its instruction step by step... thank ou for your helpfull answers...
Here is the scenario, R10 can ping 8.8.8.8 R1 (Layer 3 switch) cant ping 8.8.8.8, but can ping 192.168.254.2what i want to happen is, R1 can also ping 8.8.8.8 or the Internet, i already set the default route from R1 to R10 then a default route from R...
Current SetupWe have 2 nexus 7010 switches configured with HSRP in the network. For all the vlans core1 is Master and Core2 is standby. In the current setup we have external dhcp server and dhcp relay is configured for all the vlans on Master and...
Hi,I've Cat. 6509 with minfail status of DF card.There is no any errors in log and diag logs.How i can identify this problem?Thanks.Mod Ports Card Type Model Serial No.--- ----- ----------------------------...
I have inhereted a network in a school that is using a Cisco Catalyst 500 series switch. Previously, it appears that this switch was never managed (just plugged in and using it's default configuration). I am trying to change that and be able to contr...
Hi all.We prepare to upgrade the IOS and reviewing the 12.2(33)SXJ5 version.IOS 12.2(33)SXJ5 version of the reference site inquiry.Please help me.Thank you
Hi,My network card do not work i am sending you the output.Thinks for your help.
hello guys i need your help about thisFastEthernet0/0 unassigned YES unset up upFastEthernet0/0.10 172.57.1.174 YES manual up upFastEthernet0/0.20 172.57.1.190 YES manual up upFastEthernet0/0.30 172.57.1.198 YES manual up upFastEthernet0/0.40 172.57....
Hi. I am not a Cisco pro, only a user. I have a pair of 1721's, 1 is connected to the internet, the other is connected to the first via T1 (with repeaters, about 30 miles). It also has a wic 4esw card in it, and I am trying to conf...
Here in my office, we are all scratching our heads on this one. Switch A Switch BPo1 Po1G1/0/1 G1/0/1G2...
Hi all,I try to configure 3 routers trying to talk to each on ospf NBMA. As you can see, i have put the serial interface on Master on point-to-multipoint and the other 2 router serial interface on point-to-point. After changing the hello-interval on ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 02:53 AM | ||
04-19-2024 05:58 AM | ||
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM | ||
04-12-2024 05:48 AM |
User | Count |
---|---|
11 | |
10 | |
8 | |
7 | |
6 |