Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Hello,I been looking for this error for a while but as far as i been reading, all i know is that could be a hardweare or sofwear issue. Is this true? Or what does this means?System returned to ROM by bus error at PC 0x23C365CC, address 0xB0D0AF9 at 1...

Hello,I'm new to the forums I'm using Cisco Packet Tracer and I have two networks. 192.168.1.0 and 192.168.2.0 networks...I have a routers with two fast ethernet ports each connected to a switch obvisouly creating my two networks. the problem I have...

Hi all,Here's hoping someone can shed some light onto this. I have the following configured on a 7606 core-router:interface TenGigabitEthernet1/6 mtu 9216 ip address 192.168.103.29 255.255.255.252 ip router isis!router isis net 49.9200.1921.6810.1028...

Hi guys..I got a issue with NTP synchronization.We got a scenario like thisaccess switches-->dist switch --> ntp serverdist switch is synchronized with serverbut all the access layer switches are not getting synchronized... on access layer switch we ...

Hello,i have enabeld DHCP snooping on a switch:ip dhcp snooping vlan 10ip dhcp snoopingThen plugged in a Cisco router (fa 0/2) that has a DHCP scope and then did an "ipconfig /release" then "ipconfig /renew" and the laptop doesn't get an IP, great.Ho...

Hi,We have a current 3-stack 3750 ( 48-P,48-TS & 3750v2-48PS ) running fine. There is a plan to introduce a fourth stack member ( 3750X-48P ) into this stack.as per cisco documentation, it suggests to use 3750X as master for a mixed stack. In this ca...

suthomas1 by Level 6
  • 882 Views
  • 5 replies
  • 0 Helpful votes

Hello,i have:two nexus 5596 connected each otherthe mgmt0 is NOT in useSVI for keepalives with IP address and /30 netmaskvpc-keepalives running over fiber in e1/1. this works welluplinks to datacenter distribution switch (Cat 6500 VSS) over fiber on ...

acontes by Level 1
  • 3356 Views
  • 7 replies
  • 0 Helpful votes

Hello,I'm locking down a remote switch (3560 48 port) in a small office.  I have enabled SSH, DHCP snooping, BPDU guard and I will do DAI too, but I want to lock the ports down further to allow only a few mac addresses per port to stop stop someone f...