Buy or Renew
Buy or Renew

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
Labels

Forum Posts

Start a conversation

Resolved! Stacking a 3750X with 3750Gs

We currently have a stack of 3750G switches that are running 12.2(46)SE            C3750-ADVIPSERVICESK9-MOur 3750X is currently running 15.0(2)SE             C3750E-UNIVERSALK9-M and I believe we were told you can't stack with a Universal IOS image....

Strange ACL Behaviour

Hi all, Please help with an annoying ACL issue. I have the following extended ACL configured but for some I still can’t get web access when the time range is active.The email and other ports work perfectly but when the time range shows active in the ...

eagletec1 by • Beginner
  • 701 Views
  • 2 replies
  • 0 Helpful votes

Resolved! Routing entry for 192.168.0.0/16, supernet

                   Hi everyone,I was tracing the router when i did sh ip route it showssh ip route 192.168.210.16Routing entry for 192.168.0.0/16, supernet ********  Known via "static", distance 1, metric 0  Routing Descriptor Blocks:  * 172.31.102.1...

mahesh18 by • Frequent Contributor
  • 3549 Views
  • 8 replies
  • 0 Helpful votes

Resolved! Network Analysis Module (NME-NAM)

Hi Everyone,When i do sh ver on 3800 router i see1 cisco Integrated Service Engine(s)   Network Analysis Module (NME-NAM) 3.6(1a)in slot 1Need to know what this hardware is for  ?Thanks Mahesh

mahesh18 by • Frequent Contributor
  • 495 Views
  • 5 replies
  • 0 Helpful votes

Resolved! Nexus 7000: "service-policy type queuing output" on port-channel and/or physical port

We are planning to implement the following policy map for egress traffic on an Nexus 7000:policy-map type queuing dd-1p3q1t-8e-out-10G    class type queuing 1p3q1t-8e-out-pq1      priority level 1      shape percent 10     class type queuing 1p3q1t-8...

3750X Stack Upgrade failure

IOS upgrade tried on the stack of 2XWS-C3750X-24T-S , Upgrade was tried to support WCCP on the platform. Current version is Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(58)SE1, Not able  find any IP Plus ios in the site ?O...

ajinc by • Beginner
  • 671 Views
  • 3 replies
  • 0 Helpful votes

3560X Crash and Reboot Issue on IOS 15.0(2)SE

Hi All,I have 3560X-24T-S switches with IP Services loaded at remote sites that I have been having troubles with.  Originally, they had IOS 12.2(58)SE1 on them.  I have up to four diverse paths via point-to-point microwave at the remote sites.  The M...

woodc83 by • Beginner
  • 1125 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Network design question...

Hello, I would really appreciate some design advice on a scenario I am working through. It is as follows:I have a PCI segment I am building at a site of ours. In the diagram, you will see that I have a 3560G and a Sophos UTM 110/120 firewall. There a...

Problem routing between vlans on 3750-x

I am setting up a vm environment for a customer in my lab off site. I have two stacked 3750-x switches, a san, and threes UCS c220 M3S servers for hosts. I am trying to separate the lan traffic, san iscsi traffic, and san management traffic using vla...

paperwise by • Beginner
  • 741 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Cisco1921 Initial Login

     How do I set a password? new Cisco 2911 router,        C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, yourname>enable% No password setyourname>configure terminal            ^% Invalid input detected at '^' marker.yourname>usenamyournam...

Load Balancing Nexus Switches

                   I am trying to understand what load balancing method is used on a port channel on a Nexus switch . I have a server connected by a VPC to two Nexus switches. The nexus switches are only acting as layer 2 switches. I have a 6509 conn...

default gateway v ip route

Hello,I have a Cisco 2960 ( WS-C2960-8TC-S)  running 12.2(46)SE  C2960-LANLITEK9-M  image.I would like to set an ip route 0.0.0.0 0.0.0.0 87.101.156.97  but the current image does not allow.Will ip default-gateway 87.101.156.97 work or do I need ip r...

j44mistry by • Beginner
  • 922 Views
  • 5 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers
Spotlight Award Nomination