Switching

HiI'm unable to pass the required vlans networks to my firewall I have different vlans configured for each floor of the building,All these floors have Nortel switches which are connected to the core switch thru fibre link.I have a cisco 4507R-E core ...

Hello Group,Our configuration started very simple. One class C network behind an ISP router and an ASA 5505 with a couple of users set up for ipsec vpn access and a handful NAT rules for web and smtp and such.Recently, since going to a virtualized do...

Hi I need to know if Catalyst 4500-X does PBR in hardware?

I was working late last night making some changes that were borderline "experimental" on my primary ASA 5520.  When the changes I made didn't work out, I went in and restored to an earlier configuration using ASDM.  I had done the same thing earlier ...

I have a 2911 router connected to a 3750 switch. I have configured vlan interfaces on the 2911 router: Router                                                                                Switch Vlan interfaces                                       ...

Hi All,I understand that 8700W enhanced AC power supply is Compatible with 6-, 9-, and 13- slot chassis Based on 8700W Enhanced PS datasheet, it can be installed into existing Cisco Catalyst 6500 Series Switch chassis: both E- and non-E series Cisco ...

Let's say I have Router A thats peering with ISP A and then Router B peering with ISP B (they talk in eBGP).  Both routers take full routes from their respective ISPs and the routers iBGP peer with each other.  This would mean that on Router A,  it w...

I have 6500 core switch with 2500W power supply, and I want to install a second power supply with 3000W ? is this applicable ? if yes, is there a specific configuration that must be done ? ThanksBest Regards,Osama

We are seeing some "interesting" issues. We installed a pair of Nexus 7000's for our core and upgarded our distribution 4507s to 4507 R+Es.These are connected over 62.5 fiber using Ciscos 10G-LRMs. What I am seeing is link flap errors, but ONLY on th...

Hello,I have a question about vlan,I have one Cisco ASA 5505 Sec+ with Cisco Swith SG-300I create multiple vlan and I manage security vlan with Cisco ASA 5505 Sec+My question is : Is that all traffic must go with the Cisco ASA or all traffic go with ...

Hii have to provide internet connectivity to 4 usersfor person 1 i would like to porvide him a bandwidth of 4Mbps on interface gi0/4 of cisco 3560CG switchand the other 3 users need to provide a 1Mbps how to accomplish this can this be done on the sw...

Hello,I need to move our Dell backup server from our Nortel switches to our Cisco switches.  I have 2 stacks and I want to put one LAN cable in one of the Cisco stacks and one in the other Cisco stack, how shoudl I configure the 2 ports on the separa...