Switching

Hi All,Sorry in case I'm posting a Silly question.We are in the plan of implementing a new 10gig network. For this we have choosen the Nexus 5596 and 2232 pair. Please let me know the transceivers/accesories I should order for connecting 10Gig server...

If I have a port that is disconnected, I'm looking for a way to tell the last time the port was used. Besides clearing the counters, I'm not aware of any othr way of doing this.

Hi everyone,i have a Cisco 1941 and i'am trying to configure the internal DNS server. The Router is connected to a 8 Port Switch, my clients are connected to the Switch.I'm using the internal dhcp server, network is 172.26.128.0 / 24. The DHCP Server...

does anyone know where I can find the MTBF on the 4900M and the line cardsseems to be missing from any data sheetsthanks

Hello Everyone,So I am tasked to enable port mirroring so some voice recording software can function properly. Here is what the requirements are but its simply not making any sense to me. I am hoping someone here who knows port mirroring can look at ...

My DHCP Server is on 192.43.100.100I have VLAN Set up on my SG500 switch.I want to have the VLAN 40 on my switch to communicate to the DHCP server so that anything on the VLAN40 can pick up an IP Address automatically.I have created a Scope called VL...

                   Hi,We have an interesting issue where we have introduced an ACL on our 3560's for voice traffic. We have a mixed bag of 7940, 7942 and 7945 ip phoones, after we introduced the ACL the 7942's refuse to register, the 40's & 45's are ...

Hello Folks,We have a production 4500 with redundant sups (IVs).  This has been in production for quite sometime (5 plus years).  When I create a VLAN in global, it hangs for like 5 seconds and then my CLI comes back up.  I don't see any memory issue...

hi,i would like to know what is the best to use switching or routing in the following scenario:SW A1 ----------SW A2|            (Trunk)||SW B1-----------SW B2Switch A!1 and Switch A2 are trunked (l2) and so as B1 and B2. assume both has its own set ...

Hi, Our Home user routers are aquiring some pretty big routing tables and I would like to minimze them and also minimize the amount of routes be advertised back to the Main Campus. In a dynamips lab, I've done my summarizing only on the Georgia and M...

Hello,First of all, sorry for my bad English. :-)i've setup a little network with the following components:SA520 ---trunk--- SRW2024 ---trunk--- SG200-18                                 |                                   |                     PCs, S...