Hi guys, I'm new to packet tracer and I need to do a project, I'm really having a hard time getting this done, could you help me with it?I NEED TO PROPOSE A NETWORK SOLUTION USING VLANS ON EACH LAN SEGMENT AND CONFIGURING INTERVLAN ROUTING USING A LA...
Forum Posts
In my Head office I am using vlans 2,3,4 and have assigned dhcp scopes for each vlanin my branch office I have vlans 5,6,7 without dhcp scopesi want users that are connected to vlan 5 In branch office to get ip address from vlan 2 in head officei can...
Hi All,What would happen if you configure an SVI eg VLAN 10 with an ip helper and then configure a VLAN 11 without ip helper, but with a physical dhcp server attached in that vlan. You then configure ip directed broadcast on both SVI's.interface Vlan...
Resolved! Intervlan x DHCP
Hello everyone,Currently playing around w/ Packet Tracer to prepare for my CCNA and ive hit a stumbling block.Switch 1 hasx1 PC connected to port fa0/1 VLAN 10x1 PC connected to port fa0/2 VLAN 20x1 PC connected to port fa0/3 VLAN 30S1 is connected t...
Good afternoon,My query related to ACL . If any user want to ACL for single direction apply then how can I apply on interface vlan it will be outbound or inbound. Please help me anybody. Related screenshot I have shared in this post .
Resolved! Ethernet II in monitor capture
Hello All, A monitor capture has been configured on Cisco 9400. I have an external device with 2 interfaces (main/backup) on this Switch, when trying to monitor the main interface I received ethernet II in the capture and for the backup interface I ...
Has anybody upgraded a Catalyst 9300-48P (or similar) from 16.9.2 straight to 17.9.5? Is it okay to go direct, or do I need to do a stepped upgrade? This section from the release notes leads me to believe all will be good - but I wanted to confirm be...
Hello, I have two 3850 with my Out of Compliance license, how can I solve this problem. Thank you and good day Kerwin
Resolved! AutoQOS sanity check
switch#show auto qosAutoQoS not enabled on any interfaceThat means this config is inconsequential and not used, correct?!class-map match-all AutoQos-4.0-Scavenger-Classifymatch access-group name AutoQos-4.0-ACL-Scavengerclass-map match-all AutoQos-4....
is it possible to get the uptime, ios or catos version and version number of all my cisco switches from a script?
Simple setup: NIC Teaming on vSwitch0 connected to a Etherchannel on the Cisco side.Etherchannel spans two Cisco devices. All vSwitch0 failover looks like this:All works good on the esxi hosts using Mellanox adapters.However, NIC teaming not working...
I have two swithches both IE-3000-8TC i'm trying to set a trunk for them. Both these interfaces are duplex full, speed 100 and type 100BaseFX Fiber connections. switch a: interface 2/8switchport mode trunkduplex fullendswitch b: int Fa2/7switchport m...
Hello, I’m reaching out for some guidance…I’ve got a Cisco 2960 L2 Switch 48 Port, PC’s are the end device.I’ve reached the limit of ports and I need to connect another Switch Cisco 2960 that I have now.DHCP is configured on the FW, this is how the P...
Hi All,At an existing customer, I enabled IGMP Snooping Querier (and by default IGMP Snooping is enabled) for a L2 environment, created a separate VLAN for Wired SmartTVs that need to use Multicast streams from TV service . While all looks good, loo...
GNS3 Version: GNS3 v2.2.46Operating System: Windows 10 22H2 19045.4172GNS3 VM running on VMware® Workstation 17 Player, 17.5.0 build-22583795 hello everyone. i need help with something, i am trying to build a vlan lab environment. here is the topolog...
