Hi all, I have a 3650 stuck in the switch prompt. I've tried to set the IP address using the below commands so that I can upload the IOS, but I am unable to. set IP_ADDR Set DEFAULT_ROUTERbelow is the file system outputswitch: dirList of filesystems ...
Forum Posts
Hello,I have a Nexus 9K trunked to a C9200LOn the Nexus 9K the port is:interface Ethernet1/19switchportswitchport mode trunkswitchport trunk native vlan 888switchport trunk allowed vlan 1,254,995no shutdownOn the C9200L the port is:interface TenGigab...
Hi - I have a general question about where to find the official Cisco document for the Cisco Nexus 9300 ports and services requirements document?Thank You
I need to clarify if my Switch sg220-26 has POE ports. The documentation is confusing and I CANNOT see the POE Option for Port Management by entering as Switch Administrator.Otherwise, it is possible to make this Switch POE by placing some external s...
Bonjour a tous,Derrière un CBS350-8P-2G des bornes Wifi ont été ajoutées (peu importe les ports). Elles diffusent 2 SSID.Le 1er passe par le VLAN 1, le Second par le VLAN 11Il semble que le switch bloque la communication entre ces bornes et le routeu...
I have an SM-ES3-24-P switch module that seems to be in a failed state. How can I revive it?#service-module gi 2/0 statusService Module is Cisco GigabitEthernet2/0Service Module supports session via TTY line 131Service Module is failedService Modul...
Hello all, I am wondering if someone can help me to understand what's going on behind the hood with PVLANS on Cisco Catalyst. What I am trying to achieve may be totally the wrong application for PVLANS. If so lmk.Questions:I am having trouble wrappin...
HI i got ICMP response from host from 10.0.52.0/22 ip Series with using GW:10.0.52.2 firewall interface and also get RDP and ICMP to other location server using 172.10.8.0/21 ip series. Also got ICMP response but not get RDP of server from 10.0.11....
I wanted to test a local account on a Nexus switch and bypass the radius (ssh)connection. To do so, I add the aaa authentication login default local I am now able to access the local account but I wanna get back to the previous configuration. When...
I'm using a 9200 device running IOS 17.9.I use a script and spreadsheet to generate my config file, which I then copy onto my devices via TFTP and then copy to the running config. Nothing unusual there. However, if I then ask the device to show me th...
Resolved! C9200/C9300 MGMT Port
Hello,I am a bit confused about useing the MGMT Port on Cisco c9200 and C9300 devices. If I understand the Cisco document here right LINK the management port is not accessable from the other network ports. Thats is exactly what I need, the MGMT port ...
I've tried the configuration as below but why still can't be pinged?Is there something wrong with my configuration?
Hi folks, Having an issue here with a brand new 3650. When being deployed along with other 4 units there was a power blackout at the rack and since then this one will not load IOS up and remain in the boot loader. The thing is it seems to be stuck i...
Hi , Planning to upgrade cisco C9500-32QC models switches from 16.12.03a to 17.12.3, May I know if I can do a direct upgrade in this situation ? or do I have to go with an intermediate upgrade.in the release note document I can find only the followin...
Note: The password given in this post is an example only.Hello all, It is the ungodly hour of 12:59:59 AM 8/8/2023 CST at the time of writing this.I have finally fixed most of my configuration issues and gotten the cpu usage below 99 percent ( about ...
