Switching

Hi...I'm trying to get my head around QoS.. I have this situation:3750X (switch1)3750G (switch2) (VOD, vlan 2)3750 (switch3) (Controllers, vlan 3)switch2 and switch3 are linked to the switch1, which is doing routing.I need to prioritize the traffic o...

Hi,Just wondering if anyone may know a way of policing traffic on the Nexus 3k platform? I can't find a reference to say policing/shaping is supported...ThanksSent from Cisco Technical Support iPhone App

Hi Guys,I have 3 swicthes connected each with vlans 10,20,30 conncted to a router on stick which has proper subinterfaces for inter vlan routing.the toplogy is something like this : swicth1------switch2------switch3------->router on stickAll the trun...

this is router 887, its vlan is 192.168.3.1/24. If I'd like to add a static route via different host within same vlan, rather than the router, like:          ip route 192.168.100.0/24 192.168.3.6how can we achieve it?i tried adding it directly and fa...

Hi Guys,I know that an ELAM can be setup on a 6500 running ipservices 12.2(33)SXJ, however I noticed that following commands are not available on a 6500 router running advipservices 12.2(33)SXJ:show platform capture elam asic etcSo I wanted to know i...

Hi Experts:There are two Switches connected with ESX Server and port ethernet 0/19 being used which is configured in Trunk port and now server team is reporting that the port does not seems to have been working fine.I checked the switch port status a...

HiWhether in eigrp routes whit 3 hop count don't appear in topology table when we have 2 other route whit lower hop count?For example i have 3 route to Xr1-r2-Xr1-r3-r2-Xr1-r4-r3-r2-XAnd 3th route dont listed in eigrp topology tableAny idea plz Sen...

According to Cisco, Nexus 1010 can host up to (6) Virtual Service blades.  I can't find out how many Virtual Supervisor Modules and Virtual Ethernet Modules that make up one Nexus 1000v switches can be supported by each Virtual Service Blades.  In ot...

Today I was setting up a small network for a new client with the following equipment, 881 router,  2960 switch and a 1041 accesspoint.  The customer wanted 2 things,  a private LAN for their employees and a guest LAN via WIFI that was able to access ...

Hello to everybody!I had 2 3750 stacked and one of them decided to die (power supply) cisco replaced it and now i want to re-add that switch to stack. I have already upgraded my replacement switch to the same IOS version.I was reading that i can do i...

Hello All,I am in need of some asistance, I have searched for days one forums and Google and am unable to find a sample config that doesnt use autoqos.I need to enable QOS on a 6513 that i am using as a access switch.( loaded with WS-X6148-45AF).  I ...

Hello,We recently implemented a new WAN that is essentially bonded T1s served up to us as a copper hand off.  All our remote switches (3560s) connect to our core (3750s).  The core is running at layer 3, each remote location has a separate VLAN (and ...