Hey guys, Could please let me know if we can stack the 3750G switch with a 3750X switch ??????
Hey guys, Could please let me know if we can stack the 3750G switch with a 3750X switch ??????
Hi ,If any one could suggest me fiber switch 24 port from Cisco . I want to connect my HP servers DL-380G6,DL-380G7 . LAN port on server will be HP 81B PCIe 8Gb FC Single Port HBA.Thanks Neo
We have a Site that is connected via Wireless Bridge to the Main Site, the site is on separate VLAN with Cisco 3560 switch. The main site has 6509 swith. Configuration as per attached diagram. We are connecting a fiber between the remote and the main...
Hello I am writing to request help with regard to a high memory utilization that we have on a pair of line card WS-X6748-GE-TX and WS-X6724-SFP for a VSS 6500. I am enclosing a little part of the "show tech"of this VSS 6500 where is possible to see t...
hi,just wanna know whether stp or pvstp is enabled by default on switch...whats the difference between two?
Basically what the title says. Here is the layout:1. Comcast modem -> home router/default gateway (linksys e2000) - 192.168.1.1 -> unmanaged netgear hub 1a. from unmanaged hub, everything has a 192.168.1.x address with a subnet mask of 255.255.255.0 ...
Will the Nexus 5000 support VDCs like the 7000?
Hello.This seems very basic to me, but has me thinking in too many different directions. We are opening a separate office less than 100 ft from our current office. I want these two offices to be on the same network (have access to our exchange serv...
Hi guys,recently I noticed on a customer's network they had port channels with mulitple layer 3 sub-interfaces. This got me thinking might it be possible to have both layer 2 and layer 3 sub-interfaces running on the same port-channel.This would help...
Hello guys,I would like to know the consequences by disabling Qos under the follwing interface ( in production environment)#show mls qos interface gigabitethernet 3/0/31 queueing GigabitEthernet3/0/31 Egress Priority Queue : enabled Shaped queue w...
Hi,I've done a test in the following topology:R1(10.10.20.10)-----------------(f0/0)R3(s0/0)-------------------(s0/0)R4-----loop0(4.4.4.4/24)R3 is a C3725 w/ IOS 12.4(21a) configured for CRB with f0/0 and f0/1 in bridge-group 1R3:.......no ip cef!bri...
Hi Gentlemen, Need your advise. Outline •- L2 switches with default GW 10.3 to FW VRRP•- Trunk each other with default VLAN 1 for all the ports except trunk port Gi0/2•- Physically connected to 10.56 SVR...
Would like to impliment VLAN's onCisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(25)SEB4But I need a DHCP Realy to my Windows Based DHCP Server. How do I enable DHCP Relay on the 3560?Thanks!Mark Berry
I have tried to attach ingress service policy to the phycical interface (int gigabitethernet1/2/10). After "service-policy input mark" command following message appears: "NBAR/STILE is not supported on this platform,Policymap rejected!"- what is the ...
Dear Everyone,Good day!May I seek your assistance on my issue with my connectivity.I have a 6506 L3 SW configured a VLAN for my internet but i am having an issue between my 6506 and the router.Here's the scenario; From cisco 6506 there's a VLAN confi...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-11-2025 12:34 PM | ||
07-08-2025 11:44 PM | ||
07-04-2025 02:13 AM | ||
06-26-2025 10:05 AM | ||
06-16-2025 07:47 PM |
User | Count |
---|---|
9 | |
9 | |
8 | |
5 | |
5 |