Switching

Dear all,I don't know in N5K, what is FCoE and Fabric exteneder port use for ?N5K - FCoE port (1) Is it FCoE port is dedicated a FCoE port to connect SAN server?N5K - Fabric exteneder port(1) Is it an interface to connect with UCS ?(2) Does this Fabr...

Hi,We have a pair of 6500 with 2 x VS-S720-10G supervisors in each chassis running VSS & SSO mode -Switch 1-5   5 Supervisor Engine 720 10GE (Active)   VS-S720-10G      6   5 Supervisor Engine 720 10GE (RPR-Warm) VS-S720-10G       Switch 2 – 5   5 Su...

hi experts,we got a Cisco ws-6509-e Core switch and would need to add in a module. I haven't done this so start searching how to but I couldn't find how to configure it just how to remove/plug the module in. Will be adding this WS-X6748-GE-TX  module...

Hi There Guys!Im searching a Switch layer 3 with 24 sfp ports + 2 rj45 10/100/1000 ports! Cand you recomend a model please?Grettings.

Hi all,With the Active/Standy failover configuration on the 5520 when the Active unit fails, and the standby unit takes over does it assume all the IP addresses of the original unit? Are there any 'gotchas' to really beware of?Thanks,Adam

Am looking at a problem with Windows deployment server on 2008, customer wants to use multicast deployment and it's not working.There are 2 switches involved, 2960 connected to a Nexus 7010. The WDS is one vlan, the clients in another, all connected ...

Hi all,I am trying to configure LAG on four G/e ports on the Cisco SG300 52 switch which are connected to the four G/e NICs on a Dell R710 server. The four switch ports are thus edgeports. Without LAG configuration, the individual ports would forward...

Hello,We are thinking of replacing our router 2811 with a newer model 2911 dude to high CPU utilizaiton. Can anyone please give us a comparison of the CPU of the routers if applicable? I mean if a 2811 with CPU going up to 80% would it be wize to be ...

I have been doing my research and still have a few questions on a VSS configuration.Background:I'm adding a VSS pair to a network that trunks to a pair of Nexus 7000's. There is already a VSS pair connected to the 7000's that someone else installed. ...

I have two different 3750s, each is just a stand alone lab switch (no connections to each other).  I have a test network on switch1 (vlan10) that is 10.10.10.0/24.  The same network (10.10.10.0/24) exists on switch2 as vlan 101.  I need to connect th...

Good morning,I am trying to set a Cisco 887VA router up for a ADSL Internet connection by Telecom Italia. I have been given the following IP parameters:LAN IP Address: 85.36.247.40, Network mask: 255.255.255.248.Default  gateway: 85.36.247.41.Point-t...