Switching

HiI installed a ftp server and doing the get and put session on this server from a laptop..but i need to find out the values likenumber of bytes transferred, number of seconds it took and the kb/sec..i used filezilla to transfer data it is showing th...

I have added an image of the scenario.The configurations are as follows:R0f0/0: 10.0.0.1/24R1f0/0: 10.0.0.2/24e1/0: 192.168.1.1/26e1/1: 192.168.1.65/26e1/2: 192.168.1.129/26e1/3: 192.168.1.193/26I was interested about directed broadcast.From R0:ping ...

Hi Experts,I am using 6509 Switch installed with WS-X6748-SFP module. I used the command "show interface gigabitethernet 1/1 capablities". I am seeing a lot of stuffs in the output. One thing which interested me is "Ports-in-ASIC (Sub-port ASIC)" inf...

Can I enable IPv6 in a Catalyst 6000 Supervisor Engine 1A 2GE with MSFC2?Or Do I need to change the hardware?Any advice?Any link?Thanks

Hi everyone...our customer site has been using Dynamic NAT in 7609 Router.but when we configured NAT in 7609 Router, the NAT config was not working well....if the customer wants to go to outside (internet side), they have to pass our 7609 Router beca...

Hi,I was wondering if anyone has deployed smart install in a production environment ?I am thinking about using this feature to help automate the installation and management of new switch installations into our networks, both locally and remotely at o...

Dear AllWe in one of the customer place using Cisco ME3400 switch. I am getting a problem that one of the fastethernet port (fa0/11) is getting error-disabled at very frequently. One third party unmanaged switch is connected in this port. each i time...

hello,I'm student and I'm trying to do a backup link I mean I have a Switch 6500 on the backbone and I have a Switch 4507 free, so I want to use this switch how backup of my backbone, becouse the ISP gives me two links one for backup and now I'm not ...

I have two 6509's that are port-channeled together.  I want each 6509 to provide uplinks to a single 4509.  The problem is that STP keeps blocking all the interface on one of  my 6509's.  Is there a way to have both uplinks up at the same time?

Ok so i got this werid issue... i got 2 routers connected with a routed portchannel and they see each other as neighbhors but that are not passing routesSoruce Routerrouter eigrp 1redistribute static passive-interface defaultno passive-interface Por...