Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

Dear Experts,Please find the topology Dia.`How can I configure multicast routing in this case? Will I need to configure what at which device. I have never worked on multicast routing before.The aim is : Multicast Address (224.0.0.112 and 224.0.0.113)...

We've configured a head-end layer 3 switch and, downstream from it, an access switch (CatOS). The 2 ints (2/4 & 3/4) on the head-end switch are in an Etherchannel and the 2 corresponding ports on the access switch (2/4 & 3/4) form a trunk. The 2/4 in...

axfalk by Level 1
  • 1392 Views
  • 2 replies
  • 0 Helpful votes

VTP

Hi,Can someone please explain what's the practice of keeping switches vtp modes as server client or to use transparent mode in SMEs.Sent from Cisco Technical Support iPhone App

I have a c2951isr at a main site and a branch site that has a c1900isr.  they are linked via a site ipsec vpn.  the main t.s. is behind the 2951.  When nodes behind the 1900 try to rdc to the t.s. they timeout and cannot link.  The external address t...

mialbert by Level 1
  • 943 Views
  • 1 replies
  • 0 Helpful votes

Resolved! 2811 traceback

Hello,Can any1 tell me if this is a s/w or h/w issue? Find attached the tech-support as well 1245794: Sep  8 16:14:48.943 EEST: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x42232124z  reading 0x601245795: Sep  8 16:14:48.943 EEST: %ALIGN-3-TRA...

Is AutoSmart Port independent of SmartInstall?  What I mean is you can run AutoSmart Port and not run SmartInstall, correct?

dtom by Level 1
  • 1189 Views
  • 2 replies
  • 0 Helpful votes

We have a POC environment with a Nexus 7K, NX-OS 5.1.(3), with two downstream switches. A multicast source is on one switch and a receiver on the other.I've enabled an IGMP querier (defaults to IGMPv3 on Nexus) on the particular VLAN on Nexus, and th...

Unanswered Topics