HI,I have core switch connected to 13 other edge switches.But when i run show arp command, it shows only following switchescoresw#show arpProtocol Address Age (min) Hardware Addr Type InterfaceInternet 172.16.10.244 116 0025...
Hi,So I have been given the task of moving from an HP core switch (that is also the client switch) to a new 3750x switch stack. Everything is working but the requirement is to move the MPLS connection to the new Cisco whilst maintaining the QOS head...
Hi,Could some one kindly explain or point to a document which gives some explanation on Line Rate Switches?For examples, newly launched 3560C and 2960C are (apparently) line rate switches, see the link below:http://www.cisco.com/en/US/prod/collateral...
Hi,I will change one IOS from modular to monolithic. I want to know how is the best procedure for change de IOS.I know that it's not possible to run one cahssis of the VSS with modular and other chassis with monolithic.The only valid option it's :a) ...
Hi we had a problem in IOS upgrade on a couple of WS-C6506-E (VSS mode with one supervisor per chassis) using EFSU.Seems the problem comes from the modular to no-modular IOS we are placing (now s72033-ipservicesk9_wan-vz.122-33.SXI4a.bin à new s72033...
HIIt is my understanding that when configuring the global command spanning-tree portfast bpduguard default this will only apply BPDUguard onlyon ports already configured with the portfast command and not on trunk ports.I would like to apply this glob...
dear all, I'd like to buy the switch which is cisco 2950 swith, but I need to know weather it support local proxy arp funcation. It is important that I choose cisco switch devices or others, thanks.
Hi,Product: Cisco WRV210 Wireless-G VPN RouterProblem: Won't connect to my network switch, no lights, no connection.I've got an cable internet connection with modem plugged into the internet port and that seems to work fine. If I plug a device, such ...
Hey guys I have a server connected to an interface on a C3560 and I'm trying to mark the traffic coming to it but I'm not getting any hits on the counters when I do a show policy-map interface command.Here's the config:Access-list 101 permit ip host ...
Hi,I have a 4507R with dual WS-X4516-10GE in SSO mode with IOS cat4000-i9s-mz.122-25.EWA10. Each card is using a 10G interface.The problem is when I try to use the 2nd 10Gb interface, I get the following message:% WARNING: Interface TenGigabitEtherne...
Hi!My ISP provides me with a public ip address which I have connected to the port g1/0/24 of my Catalyst 3750.I have this configuration which allows me to ping any external address from my switch, but when I try ping to an external address (google.co...
Hey all,First post so be gentle OK We've got a 24 port 2950 setup as our DMZ switch. It's providing web access to our web servers on a secondary ISP. The DMZ switch has about 12 ports unused. What we'd like to do is take our primary ISP, used to supp...
Hi to All,Just took my Troute class last week, and we had this very interesting example for route redistributing.The LAB guide was good enough to predict that either R1 or R3 would have a routing table populated with RIP and OSPF route while the othe...
