Switching

Hello,I need to create 2 VLANs for each port because I have to connect a PC and an IP Phone on each port.I need to create VLAN20 for voice and VLAN30 for data.Is it possible to do this configuration on SLM2008?In web configuration I can not find the ...

Can any one help meHow to perform Load Balancing On 1841 Router between Serial Interface and Fast Ethernet Interface. . . . .. 

Greetings friends.  I am learning the in's and out's of our Cisco ASA 5505 security appliance and network design being my weaker point I two simple questions to ask.Currently, I have DMZ port dedicated to a wireless router for guest internet access, ...

We are looking at possibly placing some GLC-T (Copper SFPs) into the 3560-E 12 port 10GigE switch. We would install the CVR-X2-SFP to get two 1GigE ports from one 10Gig-E switch port. I am wondering if the GLC-T will be supported in the converter and...

I have a problem if I want to make a user sign on and this will I get the message and user password is wrong how can you fix this ?

Hi all,I am looking at gathering information regarding Cisco's 887's, specifically the CISCO887-SEC-K9, but am struggling to get all the answers from the cisco datasheets - can anyone answer the questions below1. 887's support up 8 VLANs, but does an...

Hello all,Got a slide from Cisco that says for the Cat 6500 Sup720/32 with IOS version 12.2(22)SXH4, that the following is supported:Mask AssignmentGRE or L2 RedirectL2 ReturnHowever, looking at the release notes it says:Web Cache Control Protocol (W...

Hi All,Just wondering if the 3845 supports OIR ( hot swap). I am looking at a link which sayshttp://www.cisco.com/en/US/docs/routers/access/3800/hardware/installation/guide/38netmod.html#wp1008236Caution The  Cisco 3845 and 3845-NOVPN router supports...

I need some help regarding testing the feature “sniffer capture capabilities” on 4506 with Sup7E card. I believe Cisco would allow you to perform the packet capture with Wireshark on this box. Is there any configuration doc/test that I would need to ...

Does anyone know if it is possible to upgrade a 2811 that currently has FE portsto GE ports?

Hi All,I'm  redesigning the core and distribution layer in company network.  Currently we only have one core/distribution switch (6504E) and 10 first level access switches (3560G). I plan to push the distribution function out of core to two 3560G swi...