Switching

We have been seeing "pause output" on our 6509 interfaces on devices that have high traffic throughput.I have seen two different descriptions of waht is telling the source port to pause.My understanding is that the device that has the pause output is...

I've been dealing with this problem for a while now.I have multiple sites with the same MPLS provider.  The provider has their Cisco 2431 router at each of my locations with a firmware of 12.4t7.  I don't have access to the Cisco's so I'm forced to w...

I'm building a network where I have a large number of switches spread across 3 building, all currently running VTP version 2 under the same domain. Each site has 2 core switches running HSRP. I have to implement 802.1x for wired users on 3750/3560 sw...

   We have two 2901 routers and want to log the messages to a syslog server. This works, but only a few messages are send to the server:For example, while the "show logging" command shows up all logged messages like this:Oct  8 16:30:57.824 CEST: %LI...

Forum members I have a question,  I am trying to run some simple debug commands on my switch to see if I have any dropped packets.This is what i have done so far.ip access list extended 150pemit  tcp host 10.1.1.1 host 10.2.2.2 eq 443pemit tcp host 1...

Hi All,I need the help  of our experts. Its very urgent and important.We have two buildings, 1 km distance you can say. There is a point to point connectivity with a wireless bridge.Both the buildings has there own Core Switch. And there is routing c...

We have two data centres each with its own internet connection. Currently we have a simple set up in that any devices on the LAN which need go out to the internet (bypassing the proxy) use the  static default route at each data centre which points to...

Hello,Having attended various road shows I hear that modular IOS is being phased out by Cisco. My question is therefore:What is the procedure for replacing my current IOS s72033-adventerprisek9-vz.122-33.SXI3.bin to the equivalent Native version. Are...

Hello,I have a 2611xm that I am trying to upgrade:I did the IOS transfer from the TFTP server:Erasing device... eeeeeeee ...erasedeeErase of flash: completeLoading tftproot/c2600-ipbasek9-mz.124-25d.bin from 10.0.55.254 (via FastEthernet0/0): !!!!!!!...